Stress and Strain/ Hooke's Law Question

AI Thread Summary
A 50 kg traffic light suspended by a steel cable is analyzed for the percentage increase in cable length due to its weight. The discussion revolves around calculating stress and strain, with emphasis on using Young's modulus for steel. Participants suggest calculating tension and stress first, then relating stress and strain to find the length change. The original poster realizes that strain directly represents the percentage increase in length, simplifying the problem. Ultimately, the OP acknowledges they had the answer all along and appreciates the assistance received.
swifel7
Messages
3
Reaction score
0

Homework Statement



A 50 kg traffic light is suspended above an intersection by a continuous steel cable. The cable has a diameter of 1.0 cm, and the light is depressed 12 degrees below the horizontal. What is the percentage increase in the length of the cable due to the mass of the traffic light?

Homework Equations



Stress=Force/Area
Strain=Change in length/original length
Young's elastic modulus(E)=Stress/Strain
Area = (pi) x (r^2)

E for steel is 200 x 10^9

The Attempt at a Solution



Well I found the stress and strain, but now I am lost.
 
Physics news on Phys.org
Hi swifel Welcome to the board. Can you calculate the tension in the cables first? Can you then find the stress in the cable? Once you do that, do you know how stress, strain and modulus relate? Can you then determine the length change?
 
are you given the value for steel or did you look it up?
I think you are overreading the question and it is simple a triangle geometry question
 
I was given the E value for steel.
 
The question wants the percentage increase in the cable's length and you've found strain, which IS the percentage increase in length.
 
hi ideas.
ideasrule said:
The question wants the percentage increase in the cable's length and you've found strain, which IS the percentage increase in length.
where above do you see strain being calculated?
 
In that case you can easily find the stress (weight of light and area)
Then with E you can find strain, strain is the relative increase in length
 
Q_Goest said:
hi ideas.

where above do you see strain being calculated?

The OP said he calculated the stress & strain. He probably had trouble calculating the absolute change in length of the cable, not realizing it wasn't necessary to calculate percentage change.
 
ideasrule said:
The OP said he calculated the stress & strain. He probably had trouble calculating the absolute change in length of the cable, not realizing it wasn't necessary to calculate percentage change.
lol ... yep...
 
  • #10
Wow, I already had the answer? Now I feel dumb, oh well. Thanks for the help guys, I really appreciate it.
 

Similar threads

Basic Stress and Strain question -- Rock on top of a vertical column
Replies
19
Views
2K
Confusion Calculating Young's Modulus
Replies
5
Views
2K
Stress-strain graph-finding elastic strain energy
Replies
2
Views
2K
Stress-strain (area under curve)
Replies
17
Views
4K
Calculating Young's Modulus from this Stress/Strain Graph
Replies
29
Views
7K
Engineering Calculating stress and strain in complex loading scenario
Replies
3
Views
2K
Thermal Expansion of a Wire Connected To a Rod
Replies
6
Views
3K
Traction/ Compression stress and strain exercise
Replies
1
Views
2K
Stress, Strain, and Sound in a Projectile Steel Rod
Replies
2
Views
2K
Calculate factor of safely on a steel bar
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top