What is the final temperature of ethanol after thermal equilibrium is reached?

AI Thread Summary
The discussion revolves around calculating the final temperature of ethanol after thermal equilibrium with a glass cylinder. The initial temperatures are -10.0°C for ethanol and 20.0°C for the glass cylinder. The user calculated a final temperature of -0.892°C for the ethanol and 0.1 cm³ for the overflow volume. However, there is confusion regarding the final temperature, as it should logically fall between the two initial temperatures. The calculations involve specific heat capacities and volume expansions of both ethanol and glass, indicating a need for verification of the results.
pat666
Messages
703
Reaction score
0

Homework Statement


1. You pour 108 cm^3 of ethanol, at a temperature of - 10.0 C, into a graduated cylinder initially at 20.0 C, filling it to the very top. The cylinder is made of glass with a specific heat of 840 J/kgK and a coefficient of volume expansion of 1.2 × 10^-5 K^-1; its mass is 0.110 kg. The mass of the ethanol is 0.0873 kg. The specific heat capacity of ethanol is 2428 J/kgK and the coefficient of volume expansion of ethanol is 7.5 × 10-^5 K^-1.
(a) What will be the final temperature of the ethanol, once thermal equilibrium is reached?
(b) How much ethanol will overflow the cylinder before thermal equilibrium is reached?

Homework Equations



Q_e+Q_g=0
m_g c_g (T_f-T_gi )+m_e c_e (T_f-T_ei )=0
ΔV/V=βΔT

The Attempt at a Solution



Ive solved them - i really need someone to check them for me, i got - 0.892C for a which i think is right and 0.1cm^3 for b. I am really unsure of b. To solve b i found the expansion of the glass to be -2.71*〖10〗^(-8) m^3 and therefore the final volume to be 1.0797*〖10〗^(-4)m3 then i did the same for the ethanol which i got 7.38*〖10〗^(-8)m3 and 1.0807*〖10〗^(-4)m3 respectively... from that i found V_loss=V_fe-V_fg and then i got the answer of 0.1 cm3... any help is appreciated
 
Physics news on Phys.org
The ethanol is heating up from 10 C and the glass is cooling down from 20 C so you should get a final temperature some where in between so I don't see your final temperature of .89 C. The over flow equals the volume expansion of the ethanol plus the volume contraction of the glass.
 
sorry that's my bad typing. its heating up from minus 10 degrees and cooling down from 20 degrees and my answer is minus 0.892 degrees. all Celsius for part a.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top