Thermodynamics: adiabatic processes

AI Thread Summary
The discussion revolves around solving a thermodynamics homework problem related to a multicylinder engine's energy consumption and output. Participants express difficulty in starting the problem and seek guidance on how to approach it. References to external resources with step-by-step solutions are shared, but some users note that these do not cover all parts of the question. The importance of showing work to identify where participants are struggling is emphasized. Overall, the thread highlights the collaborative effort to understand adiabatic processes in the context of engine mechanics.
zandbera
Messages
18
Reaction score
0

Homework Statement


A multicylinder engine in an airplane operating at 2500 rev/min takes in energy 7.89 x 10^3 J and exhausts 4.58 x 10^3 J for each revolution of the crankshaft. (a) How many litres of fuel does it consume in 1.00 h of operation if the heat of combustion is 4.02 x 10^7 J/L ? (b) What is the mechanical power output of the engine? Ignore friction and express the answer in horsepower. (c) What is the torque exerted by the crankshaft on the load? (d) What power must the exhaust and cooling system transfer out of the engine?

Homework Equations


e = Weng / Qh = 1 - Qc/ Qh

The Attempt at a Solution


I just have no idea where to start this, so any tips would be greatly appreciated
 
Last edited:
Physics news on Phys.org
bump for help
 
Hi, Arin. It's Gareth. :) I was looking for help on the same question, and this was the first page on Google.

Anyway, if you still want help, I found this other page that has the step-by-step answers: http://www.csupomona.edu/~skboddeker/132/assign/ch22h.htm
 
Last edited by a moderator:
haha hey, yeah i found another site that had a bit of an explanation to it, but it didn't have c) or d) to it. thanks
 
hi zandbera, welcome to PF
so where are you at with the problem? helps to show some work so we know where you are getting stuck
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

How to Find the Number of Liters of Gas Used in a Gasoline Engine
Replies
3
Views
2K
Thermodynamics problem involving engine efficiency
Replies
20
Views
3K
Thermodynamics -- first and second law concepts
Replies
2
Views
2K
How Does Torque Relate to Heat Engines and the Second Law of Thermodynamics?
Replies
1
Views
3K
Calculating work of Otto cycle stages - Thermodynamics.
Replies
1
Views
3K
Torque exerted by cranksahft on load
Replies
2
Views
4K
Thermodynamics: Steam is added to an ice cube
Replies
16
Views
3K
Thermodynamics: Waste heat and total ice converted to steam
Replies
2
Views
3K
Can a thermodynamic heat engine include all these processes?
Replies
2
Views
2K
How do temperature differences affect the work done in an ideal Carnot process?
Replies
1
Views
1K

Hot Threads

Recent Insights

Back
Top