Three Digital Clocks at Different Speeds

  • Thread starter Thread starter d-rock
  • Start date Start date
  • Tags Tags
    Clocks Digital
d-rock
Messages
14
Reaction score
0

Homework Statement


Three digital clocks A, B, and C run at different rates and do not have simultaneous readings of zero. Figure 1-6 shows simultaneous readings on pairs of the clocks for four occasions:

___________312_________________512__ Clock A
___25______125_______200_______290__ Clock B
___92________________142____________ Clock C

For example, at the earliest occasion, B reads 25 s and C reads 92 s. If two events are 600 s apart on Clock A, how far apart are they on (A) clock B and (B) clock C? (C) When clock A reads 400 s, what does clock B read? (D) When clock C reads 15 s, what does clock B read? (Assume negative readings for prezero times.)


Homework Equations


Unsure other than possibly a bunch of ratios?


The Attempt at a Solution


Okay, on the little line chart I made above, any spot where the numbers are right on top/below each other is a point where sumultaneous readings are. At the first event, Clock B is at 25 seconds while Clock C is at 92 seconds, and so on.

Since the chart was somewhat easy to read, I added up the time between 312 and 512 on Clock A, and the time between 125 and 290 on Clock B:

(A) Therefore, for on Clock A there is a space of 200 seconds while Clock B has 165 seconds. For Clock A to go 600 seconds, I multiplied the space by 3, and thus did the same to Clock B's space since they are the simultaneous, thus getting a time of 495 seconds on Clock B. The answer in the book says this is correct.

The problem I have is that I have no absolute clue on what to do or what equations to use, as I obviously cannot use the above method for part B of the question.

I'm in a college-level Physics course in my 12th grade year of High School. I've no real Physics knowledge although I have taken one part of Calculus. We have not been tought much yet but the teacher allows us to call him if we need help. I cannot reach him however and so I'm pretty much stuck.

Is there any direction that someone can at least point me in, because this is already quite confusing? I'm assuming I need some ratios or something but I cannot put it together.

This is due tomorrow and I've only had today to do it. I have other problems to do too but this is the only tough one so far.
 
Last edited:
Physics news on Phys.org
d d-rock,
is the line the clock interval ?
 
Hey, you got it right in the first part, this is really all about ratios:
What you did there is basically: (interval B/interval A) * 600 = 495
logically, all you have to do in (b) is: (interval C/interval B) * 495 =...
This is more about logic than actual physics (except when it comes to relativity principles); good luck!
 
Yeah I went into school early and was figuring out the ratio. I finally understood it so yeah, it's good now.
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top