Total Electric Potential, when is it zero?

AI Thread Summary
To determine where the total electric potential is zero between a +6.0µC charge at point A and a -2.0µC charge at point B, the potentials from both charges must cancel each other out. The potential at a point can be expressed as the sum of the potentials from each charge, which can be set to zero to find the location. There are three potential regions to consider: between the charges and on either side. By selecting a distance "x" from charge A and calculating the corresponding distance from charge B, one can set up the equation to solve for x. Exploring all three regions will help identify the correct location where the total electric potential equals zero.
aeromat
Messages
113
Reaction score
0

Homework Statement


A charge of +6.0µC at point A is separated 10.0 cm from a charge of -2.0µC at point B. At what locations on the line that passes through the two charges will the total electric potential be 0?

The Attempt at a Solution

[(+) A] ------------------------------ [(-) B]I know that for them to cancel out each other, then they must be equal to each other. However, I don't know how to proceed to determine where the right location would be.
 
Physics news on Phys.org
Suppose you pick a point that's a distance "x" from A, and therefore 10 cm - x from B. Can you write out the electric potential at that point? If so, just set it to 0 and solve for x.
 
Yes, there are three main sections that the point may be (between the charges, or on either side) Try all of these possibilities and see if you can make one of them work.
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of the question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

The sign of the change in potential
Replies
7
Views
459
Electric Potential Energy of Point Charge Systems
Replies
2
Views
938
Capacitors, equipotentials, and electric fields
Replies
5
Views
950
Earthing of two parallel conducting plates
Replies
11
Views
1K
Why Is Work Positive When Done Against the Electric Field?
Replies
22
Views
3K
Why are the electrostatic field lines normal to a charged conductor?
Replies
10
Views
1K
Location where the electric potential is zero between charges
Replies
4
Views
2K
Discontinuity in an Electric line of force
Replies
12
Views
2K
Minimizing the Energy of Two Conductors Very Far Apart
Replies
23
Views
2K
Use of imaginary charge vs Gauss' law
Replies
12
Views
952

Hot Threads

Recent Insights

Back
Top