Transformers and Impedance Matching

AI Thread Summary
The discussion focuses on solving physics problems related to transformers and impedance matching. Participants seek assistance with calculations involving voltage drops across RLC circuits and transformers, as well as estimating solar energy absorption during sunbathing. Key equations for impedance and power in transformers are shared, emphasizing the relationship between primary and secondary turns and their respective voltages and currents. There is also clarification on the importance of understanding the context of the problems, particularly regarding the output impedance of amplifiers. The conversation highlights the need for careful application of formulas and units to arrive at correct solutions.
mikejones2000
Messages
18
Reaction score
0
Hey all, any help with any of these problems would be greatly appreciated, I have attempted all but one(because I do not even know where to start).

Homework Statement


A 58.0 resistor, a 3.00 µF capacitor, and a 0.400 H inductor are connected in series to a 77.0 V (rms), 60.0 Hz source.
(a) Find the voltage drop across the LC combination.
(b) Find the voltage drop across the RC combination.

Homework Equations


For RC-> Z=sqr(R^2+Xc^2), Vmax=ImaxZ, For LC-> Z=sqr(R^2+(Xl-Xc)^2), I=V/R, Vmax=V(sqr(2)).

The Attempt at a Solution


I calculated Imax first and then found each different Z. I then put the values into Vmax=ImaxZ.

Homework Statement


An AC adapter for a telephone-answering unit uses a transformer to reduce the line voltage of 120 V (rms) to a voltage of 9.5 V. The rms current delivered to the answering system is 390 mA.
(a) If the primary (input) coil in the transformer in the adapter has 240 turns, how many turns are there on the secondary (output) coil?
(b) What is the rms power delivered to the transformer? Assume an ideal transformer.

Homework Equations


Vc=(N2/N1)V1, Pav=IrmsVr

The Attempt at a Solution


I know how to get the first part of this question but the second eludes me. I tried using 120V for Vr and also 120(sqr(2)) considering the transformer is ideal.

Homework Statement


Suppose you wish to use a transformer as an impedance-matching device between an audio amplifier that has an output impedance of 6.8 k and a speaker that has an input impedance of 6.5 . What should be the ratio of primary to secondary turns on the transformer?

Homework Equations


I could not find any equations relating impedance and transformers in my text but I found one online->Z1/Z2=(N1/N2)^2

The Attempt at a Solution


Plug'chugged and got it wrong. :(

Homework Statement


The intensity of solar radiation at the top of Earth's atmosphere is 1340 W/m3. Assuming that 60% of the incoming solar energy reaches Earth's surface and assuming that you absorb 50% of the incident energy, make an order-of-magnitude estimate of the amount of solar energy you absorb in a 60 minute sunbath. (Assume that you occupy a 1.7 m by 0.3 m area of beach blanket and that the sun's angle of elevation is 60°.)

Homework Equations


The Attempt at a Solution


I am rather clueless at where to begin with this one. I understand that the energy will be reduced by .6 and then by .5 but I am pretty stumped.
 
Physics news on Phys.org
*A* I'd start by calculating the total complex impedance of the series RLC combination, and using that to calculate the complex current. Once you have the current, then you can do the impedance combinations to get the individual voltage drops. Your way may work as well, but I didn't understand it with a quick read.

*B* Hopefully the question says 9.5Vrms output? For the calc (b), remember that for an ideal transformer, primary power in = secondary power out. You are given the primary input voltage and primary input current, so what can you say about the output power and current?

*C* Check the problem statement. I think it is a typo to say that the audio output amplifier has an output impedance of 6.8kOhms... are you sure? That's pretty high for any kind of amp to feed a speaker, even a small one. That's probably where the error is. And yes, that is the correct equation. But before just using it, you should understand how to derive it. What is the relationship between input/output voltages in terms of number of turns? What is the similar relationship between input/output currents in terms of number of turns. Now, remembering that Z=V/I, what can you say about the transformed impedance ratio looking through a transformer at a secondary load...?

*D* Hint -- Watt is a measure of power. Joule is a measure of energy. What is the relationship that relates power to energy?


(whew, my fingers are tired!)
 
Ok, I resolved all of the problems except this one:
The intensity of solar radiation at the top of Earth's atmosphere is 1340 W/m3. Assuming that 60% of the incoming solar energy reaches Earth's surface and assuming that you absorb 50% of the incident energy, make an order-of-magnitude estimate of the amount of solar energy you absorb in a 60 minute sunbath. (Assume that you occupy a 1.7 m by 0.3 m area of beach blanket and that the sun's angle of elevation is 60°.)
DeltaE = 10___

Solution: I multiplied the intensity by .5 and .6. I then multiplied that number by (1.7 * .3)(60 minutes * 60 seconds). I then multiplied it by cos60 and sin60 but still did not get a correct answer. Any quick response/help would be greatly appreciated, the homework is due soon. Thanks in advance, Mike.
 
What did you get? The sin(60 degrees) answer is preferable, since that's the correct choice. The more work you can show us the easier to tell where you might have gone wrong. If anywhere. Note the questions asks for 'order of magnitude' (just a power of 10?).
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top