Understanding Atwood's Machine: Forces, Diagrams, and Gravity Explained

  • Thread starter Thread starter uestions
  • Start date Start date
  • Tags Tags
    Machine
AI Thread Summary
Atwood's Machine involves two weights connected by a pulley, where gravity acts on each weight but their accelerations differ due to their unequal masses. Each weight experiences gravity pulling down, but the tension in the rope affects their movement, causing one weight to ascend while the other descends. When weights are equal, the forces balance, resulting in no net acceleration. However, with unequal weights, the heavier weight exerts a greater force, leading to acceleration based on the mass difference. The system's dynamics are governed by Newton's laws, ensuring that the net force on the massless rope remains zero, which constrains both weights to share the same acceleration.
uestions
Messages
22
Reaction score
0
Atwood's Machine, with one pulley and two weights, is analyzed with two free body diagrams. Each diagram depicts the forces applied to each weight. If the weights are connected, why isn't gravity considered to be pulling on both weights in the same direction? (Meaning, why aren't the masses for the weights combined to make one force diagram with one mass? Because the acceleration is not equal to 9.8m/s/s?)
A simpler question may be how does an Atwood Machine work?
 
Physics news on Phys.org
uestions said:
If the weights are connected, why isn't gravity considered to be pulling on both weights in the same direction?
The weight of each mass does point in the same direction of course--down!

(Meaning, why aren't the masses for the weights combined to make one force diagram with one mass? Because the acceleration is not equal to 9.8m/s/s?)
The masses have different accelerations. One goes up while the other goes down. It would be more complicated to treat the masses as a single system (but you could do that if you liked).
 
  • Like
Likes 1 person
Gravity is pulling down on each weight in the same direction. However, each weight is pulling on the other via the wire and pulley. When the weights are equal, the force of gravity on each weight is equal, and since they pull on each other with a force equal to that of gravity, there is no net acceleration.

However, when the mass of the weights aren't equal, gravity pulls the heavier weight with more force (hence why it is heavier). This translates to the heavier weight pulling on the lighter weight with more force than vice versa. So the heavier weight falls while the lighter weight is lifted. The greater the difference between the masses of the weights, the faster the weights will accelerate.

Does that make sense?
 
  • Like
Likes 1 person
Drakkith said:
This translates to the heavier weight pulling on the lighter weight with more force than vice versa.
Does that make sense?

Poor choice of words. The force between the weights is the tension on the string which is identical at both ends.
 
Why does the magnitude of the tension not equal the magnitude of the difference in the weight of the weights?
 
uestions said:
Why does the magnitude of the tension not equal the magnitude of the difference in the weight of the weights?
Why should it? What if the weights were the same?
 
uestions said:
Why does the magnitude of the tension not equal the magnitude of the difference in the weight of the weights?


Because the system is not at rest.
 
Why must the tension be equal for each weight? Because of Newton's Third Law?
Does the tension take into account the other weight's (as in object) weight (as in force) pulling on another weight (object)?
 
Last edited:
uestions said:
Why must the tension be equal for each weight?
The net force on a massless rope must be zero.
 
  • #10
Doc Al said:
The net force on a massless rope must be zero.


Why must the net force be zero? If it weren't, would that mean one weight would have a different acceleration?
 
  • #11
uestions said:
Why must the net force be zero?
The net force on any massless object must be zero:
∑F = ma = (0)a = 0

(The alternative would be infinite acceleration.)

If it weren't, would that mean one weight would have a different acceleration?
Since the masses are connected via the rope, they are constrained to have the same acceleration. (Assuming a non-stretchy rope.)
 
Back
Top