Understanding Bridge Rectifiers to AC Theory and Function

  • Thread starter Thread starter prasannapakkiam
  • Start date Start date
  • Tags Tags
    Bridge
AI Thread Summary
The discussion centers on the operation of bridge rectifiers in AC circuits, specifically addressing misconceptions about current paths. It clarifies that during conduction, only one pair of diodes is active while the other pair remains reverse biased, preventing short circuits. The colors in the schematic indicate which diodes are conducting at any moment, with blue representing forward conduction and red indicating reverse bias. An alternate schematic suggestion aims to illustrate the function of diodes more clearly by separating the circuits for each conducting pair. This explanation helps to resolve confusion regarding current flow in bridge rectifiers.
prasannapakkiam
http://www.play-hookey.com/ac_theory/images/rectifier_bridge.gif

When I see this, I remember that my teacher never explained this clearlly to me. As I see it (follow the Blue Current), when the current returns to the negative (temperorary) terminal, there can be 2 possible paths. It can take the top blue one OR the Bottom Red one. Should there not be a short circuit?

I would like it if someone clarified this for me...
 
Physics news on Phys.org
But only one pair of diodes are conducting at any given time. The different colors represent conduction on either the positive or negative half of the waveform. Therefore when blue is conduction, red is reversed biased (open circuit).

Maybe an alternate schematic will clear things up:
http://sub.allaboutcircuits.com/images/03266.png
 
try removing the reverse biased diode and make two saperate circuits showing one pair of diodes working(forward bias) at a time. you ll notice current is still flowing in the same direction
 
Thanks for point out the reverse bias bit. That clarified my doubts...
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...

Similar threads

Back
Top