Velocities of Cables Linked to Pulleys | Leonel

  • Thread starter Thread starter leonel
  • Start date Start date
  • Tags Tags
    Blocks Pulleys
leonel
Messages
7
Reaction score
0
Hi, for all !

could any of you help me to understand the velocities on cables linked to pulleys. Please, see the attached problem.

thank for all of you,
Leonel
 

Attachments

Engineering news on Phys.org
Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...

Similar threads

Replies
19
Views
2K
Replies
24
Views
2K
Replies
16
Views
4K
Replies
7
Views
9K
Replies
11
Views
2K
Back
Top