Velocity and displacement question

AI Thread Summary
The swimmer moves at 0.15 m/s across a 100-meter-wide river and ends up 50 meters downstream, prompting questions about the speed of the current and the swimmer's direction. The initial calculation of the current's speed at 13.3 m/s is deemed incorrect, as it would result in an unrealistic downstream distance. Instead, the correct approach involves calculating the time taken to cross the river and the corresponding distance moved by the current. For part (b), a vector approach is suggested to determine the swimmer's optimal heading to reach directly across. The discussion emphasizes the need for accurate calculations and understanding of relative motion in water.
Steven-
Messages
5
Reaction score
0
Swimming at 0.15 m/s relative to still water, a swimmer heads directly across a 100-m-wide river. He arrives 50 m downstream from a point directly across the river from his starting point.
a) What is the speed of the current in the river?
b) In what direction should the swimmer head so as to arrive at a point directly opposite his starting point?

I got 13.3 meters/second for part (a). Can someone check this?
For part (b), I am unsure of what to do. Can someone give me a hint in the right direction?
 
Physics news on Phys.org
For part b: If the swimmer wanted to stay in one place, how fast would he have to swim? In what direction? Hopefully, this speed is less than the swimmer's stop speed, otherwise there'd be no way he could swim across without being swept downstream. This leads me to believe your answer for part a of 13.3 m/s is incorrect. Besides, 13.3 m/s is a very fast speed for a river.
 
Your answer for (a) is correct, for b, try using a vector approach.
 
(a) can't possibly be correct. If there were no current, the swimmer would cross the river in 100/0.15 = about 600 seconds. In the same time, a current of 13.3 meters/s would sweep the guy 8000 meters downstream.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top