Velocity Time Graph to calculate resistive forces

AI Thread Summary
To estimate the rocket car's acceleration at 9.1 seconds after the parachute opens, the correct approach is to draw a tangent to the graph at that point and calculate its slope. The net force down the slope can be determined using the formula F=ma, where 'm' is the mass of the car and 'a' is the acceleration found. To find the total resistive force, subtract the net force calculated from the gravitational force acting on the car down the slope. At 20 seconds, when the car reaches steady speed, the net resistive force equals the net forward force due to gravity, as the car experiences zero acceleration. Understanding these concepts clarifies the relationship between forces acting on the rocket car during its motion.
vf_one
Messages
13
Reaction score
0
Hi I'm having trouble with this problem and was wondering if anyone could help point me in the right direction.

Homework Statement



An experimental rocket-car of mass 1000 kg is at rest on a road that is inclined at 10 degrees to the horizontal. The driver starts the engine and releases the brakes and accelerates the rocket car down the slope for 9s. At that point the engine stops and a rear end parachute opens rapidly slowing the vehicle. (Shown in graph in attachment)

Estimate the rocket car's acceleration at t=9.1s immediately after the parachute opens
Using this answer, find
i) the net force down the slope
ii) the total resistive force (due to air resistance, friction etc)
at 9.1 s after the engine stops

2. The attempt at a solution

To find the acceleration at 9.1s, I would have to draw a tangent to that point on the graph and then find the slope of the tangent. Would this be correct?

i) to calculate the net force down the slop would this simply be
F=ma
m-mass of the rocket car, 1000kg
a- acceleration at 9.1s from the previous answer?

ii) I have no idea how to find the total resistive force. Can anyone give me any hints to start me off?

Thanks
 

Attachments

Physics news on Phys.org
For using the tangent to find the acceleration you are correct. For i) and ii) I'm not sure if the question asks for 9.1secs after the start of this whole thing, which would make sense; or what you wrote, perhaps a typo, 9.1 secs after the engine stops, which would mean 18.1 secs after the whole experiment started. I couldn't open the attachment because of the format; but I'm assuming you mistyped and we're looking at .1second after the engine stopped. In this case you are correct for i). For ii), calculate what the net force down the slope would be due to gravity, then subtract the answer you got for i), since friction and air resistance are the reason the actual net force is less than what you just got.
 
Hey Tusike

Thanks for your help! Sorry that was a typo, it was meant to say '9.1s, just after the engine stops' so your assumption was right.

I still don't understand why you need to subtract the force found in i) by the forward force due to gravity.

The next question asks to calculate the net resistive force (due to air resistance on the parachute, friction etc) at t=20s, when a steady speed has been reached.

In this case the rocket car is traveling at 0 acceleration so the net resistive force would equal the net forward force. Since the engine is not turned on does this mean the net forward force is due to the gravity?
 
Last edited:
I just did another question that was similar to this one except it was about skydiving and I was able to solve it. I think I understand this now. Thanks for your help!
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top