What are the forces on a hinged beam supporting a shop sign?

  • Thread starter Thread starter djunderseage
  • Start date Start date
  • Tags Tags
    Beam Cable
AI Thread Summary
A shop sign weighing 255 N is supported by a uniform beam weighing 145 N, creating a system in static equilibrium. The forces acting on the system include the weight of the sign, the weight of the beam, the tension in the guy wire, and the forces exerted by the hinge. In static equilibrium, the sum of all forces and the sum of torques must equal zero. The tension in the guy wire and the hinge forces can be calculated using these principles. Properly solving the equations will yield the required values for tension and hinge forces.
djunderseage
Messages
3
Reaction score
0
A shop sign weighing 255 N is supported by a uniform 145 N beam as shown in Fig. 9-54. Find the tension in the guy wire. Find the horizontal and vertical forces exerted by the hinge on the beam.

9-54.gif
 
Physics news on Phys.org
Write down all the forces acting on the system. The system is in static equilibrium so what can you conclude from it? (Meaning about the torque and sum of all forces).
 
i have that done just didnt know how to put it on the forum. i think they would be 0...
 
Right. Now solve the equations you have. Especially solve for what they're asking you.
 
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »

Similar threads

How Is the Vertical Force Calculated at the Hinge in a Beam and Sign System?
Replies
8
Views
6K
Does distance affect torque in hanging sign problem?
Replies
42
Views
4K
Sign hanging from massless beam attached to hinge supported by string
Replies
10
Views
3K
How Are Reaction Forces Calculated in a Hinged Beam and Strut System?
Replies
1
Views
5K
How Do You Calculate Forces and Balance a Hanging Cafe Sign?
Replies
18
Views
3K
Force Acting on Hinge: 2744 N Torque on Beam Homework: Find Force on Hinge
Replies
6
Views
2K
Torque and rotational equilibrium question
Replies
6
Views
4K
How Do Forces Interact in a Frictionless Hinged V-Beam System?
Replies
4
Views
9K
Tension and net torque in a cable
Replies
10
Views
5K
Tension and Hinge Force Problem
Replies
5
Views
7K

Hot Threads

Recent Insights

Back
Top