What is the Acceleration of a Mass on an Incline Plane?

AI Thread Summary
The discussion focuses on calculating the acceleration of a mass on an incline connected to a hanging mass via a pulley. The initial attempt yielded an incorrect acceleration of -2.306 m/s² due to misapplication of the tension formula. Participants clarified that the tension should be treated as an unknown, leading to two equations for the two masses, which can be solved simultaneously. Defining the direction of acceleration as positive or negative is crucial for accurate results. Ultimately, the correct approach resolved the problem successfully.
Koscher
Messages
21
Reaction score
0

Homework Statement



A hanging mass, M1 = 0.493 kg, is attached by a light string that runs over a friction-less pulley to a mass M2 =1.81 kg that is initially at rest on a friction-less ramp. The ramp is at angle 30.5 above horizontal. Find the magnitude and direction of the acceleration, a2, of M2.


Homework Equations



F=ma
T-mgsin(theta)=ma
F(perpendicular)=M*cos(theta)
F(parallel)=M*sin(theta)

The Attempt at a Solution



(.493)(9.81)-(1.81)(9.81)sin(30.5) = 1.81a
a = -2.306 m/s^2

But that is not the right answer. So I am lost.
 
Physics news on Phys.org
Are you sure about the sign for the acceleration?

Which direction is defined as positive or negative?
 
Take a positive result to be "up the ramp" and a negative result to be "down the ramp".

That is what the help my professor gave the class about the signs. Which i believe that it is a negative sign but i could be wrong.
 
Koscher said:

Homework Statement



A hanging mass, M1 = 0.493 kg, is attached by a light string that runs over a friction-less pulley to a mass M2 =1.81 kg that is initially at rest on a friction-less ramp. The ramp is at angle 30.5 above horizontal. Find the magnitude and direction of the acceleration, a2, of M2.


Homework Equations



F=ma
T-mgsin(theta)=ma
F(perpendicular)=M*cos(theta)
F(parallel)=M*sin(theta)

The Attempt at a Solution



(.493)(9.81)-(1.81)(9.81)sin(30.5) = 1.81a
a = -2.306 m/s^2

But that is not the right answer. So I am lost.

It looks as though you tried to apply your formula T-mgsin(theta)=ma but used M1*g for the tension, T. This isn't correct. When the masses are allowed to accelerate the tension in the string will be less than that.

If you write that formula separately for each of the blocks leaving T as an unknown, you'll have two equations in two unknowns (a and T). Eliminate T and solve for a. Note that for the first block, because there is no slope (or you could say that the angle is 90° for it) the formula simplifies to: T - M1*g = M1*a . Be sure to pick a direction for positive acceleration and adjust the expressions accordingly (you can multiply the LHS by -1 to change the sign).
 
Thank you, that makes sense, I solved it with T as an unknown and got the right answer.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top