What is the Power Delivered by the Person Pulling the Rope?

  • Thread starter Thread starter glockstock
  • Start date Start date
  • Tags Tags
    Power Work
AI Thread Summary
The discussion centers on calculating the power delivered by a person pulling a rope to lift a 6.1-kg box. For constant speed lifting, the power is determined using the formula P = F * v, resulting in 0.120 kW. When lifting with constant acceleration, the force exerted by the person must account for both the gravitational force and the net force required for acceleration. The average power is calculated by multiplying the total force by the average velocity, which requires determining the box's acceleration and average velocity using kinematic equations. The key takeaway is that the person must exert enough force to overcome gravity and provide the necessary acceleration for the box.
glockstock
Messages
5
Reaction score
0

Homework Statement


A 6.1-kg box is being lifted by means of a light rope that is threaded through a single, light, frictionless pulley that is attached to the ceiling.

(a) If the box is being lifted at a constant speed of 2.0 m/s, what is the power delivered by the person pulling on the rope?

(b) If the box is lifted, at constant acceleration, from rest on the floor to a height of 1.4 m above the floor in 0.42 s, what average power is delivered by the person pulling on the rope?


Homework Equations


P = F * v
KE = .5mv^2
W = F * distance
W = KE

The Attempt at a Solution


I've answered the first problem, getting .120 kW as an answer. But I'm having trouble with the (b), and maybe the concept of average power is throwing me off. I don't know what to do with the time given (0.42 s) and the height (1.4 m)...I know power is KE/T, but I don't know what the velocity is in KE since no acceleration was given. Thanks for your help! Much appreciated.
 
Physics news on Phys.org
If the box is lifted at constant acceleration from rest, you can find the acceleration using the kinematic equation for x(t).
 
Last edited:
OK, so using the kinematic equation I've found the acceleration to be 15.87 m/s^2...do I use another kinematic equation to find a velocity, and use F=ma with the mass of the box (6.1kg) and my acceleration (15.87) to get a force of 96.81N, then multiply that by the velocity for power? Or do I have to consider the force of gravity too, and subtract that force from the 96.81N...
 
You need to consider the force of gravity. F = ma gives you the net force not the force the person is exerting on the box. Once you find the force exerted by the person, you need to multiply by the average velocity to get average power.
 
P=Fv=ma(vavg)
SOLVE FOR a:
h=\frac{1}{2}at2

PLUG IN a and SOLVE FOR vavg (which is v/2):
v2=2ah​
 
Last edited:
Rubber Band said:
P=Fv=ma(vavg)


SOLVE FOR a:
h=\frac{1}{2}at2

PLUG IN a and SOLVE FOR vavg (which is v/2):
v2=2ah​


The power that Rubber Band proposes as the answer is not the power delivered by the person. It is the power delivered by the net force. The person has to deliver enough power to do two things, overcome gravity and accelerate the box. The tension in the rope is equal and opposite to the force the person exerts. Therefore, the power delivered by the rope is the same as the tension. When a rope accelerates a bucket up (or down), the tension is not ma.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top