What is the value of the load resistor?

AI Thread Summary
The discussion revolves around the value of a load resistor, initially thought to be 32 but later corrected to 72. Participants emphasize the importance of providing context and units when discussing answers. The internal resistance of a high voltage power supply is mentioned as 24 MΩ, but its accuracy is questioned. The conversation highlights the need for clarity and adherence to forum rules regarding effort in responses. Accurate communication of values and units is crucial in technical discussions.
boxman
Messages
2
Reaction score
0
Homework Statement
The internal resistance of a high voltage power supply is 24 MΩ and the output is set so that the potential difference across the output when on open circuit is 4000 V? When a load resistor RL is connected across the supply the voltage across RL is 3000 V.

What is the value of the load resistor?
Relevant Equations
I am not sure what equation to use.
But I think the answer is 32, is it correct?
 
Physics news on Phys.org
Hi @boxman and welcome to PF.
:welcome:
According to forum rules you must show at least an effort towards the answer. Perhaps you could explain what led you to think that the answer is 32 and not something else?
 
actually I rewatched the recording of the lecture and realized the answer was 72. But sorry about the low effort post its my first time using this forum and was unaware of the rules! :)
 
72? 72 what? Volts? Kilograms? Units do actually matter in the real world.
 
boxman said:
Homework Statement:: The internal resistance of a high voltage power supply is 24 MΩ
Are you sure about the 24 MΩ number? That does not look right.
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Finding the value of this load resistor
Replies
2
Views
1K
Why is there a resistor in a MOSFET-based inverter?
Replies
9
Views
2K
Finding Current in Resistors & Charge of Capacitor
Replies
4
Views
2K
Finding parallel or in-series resistors
Replies
3
Views
707
Maximum Power dissipated at load resistor
Replies
3
Views
947
Finding an open-cicuit voltage, why is resistor in series ignored?
Replies
2
Views
1K
Calculating the voltage across capacitors and resistors with switches
Replies
2
Views
774
Analyzing Bridge Circuit w/ Loop Currents
Replies
6
Views
1K
Why is current constant through a resistor?
Replies
11
Views
1K
Current Division: Find Load Resistor Current for 4 Resistors
Replies
5
Views
1K

Hot Threads

Recent Insights

Back
Top