Where can I find resources for becoming an HVAC engineer?

AI Thread Summary
Resources for becoming an HVAC engineer include joining ASHRAE and reading relevant books on the subject. Practical experience from internships is emphasized as the most beneficial learning tool. Participants suggest that hands-on work during internships is crucial for adapting to the field. Engaging with professional organizations like ASHRAE can provide valuable insights and networking opportunities. Overall, combining practical experience with additional resources is key to success in HVAC engineering.
dannyboy18
Messages
3
Reaction score
0
Hey all,

I am beginning my first job out of college this coming January. I will be working for an architectural/engineering firm as an entry level mechanical engineer designing HVAC systems. I have interned with them for two summers so the company is not completely foreign to me. However, I'd like more information, rules of thumb, etc. What books, resources, etc. do you guys recommend I read/study to help me adapt better to this field? (Unfortunately my school BARELY touches on the subject of HVAC).

Thank you,

Dan
 
Engineering news on Phys.org
Gosh guys, no advice?
 
I'm an HVAC engineer. Honestly, nothing we can say can help you as much as your internship could (as long as they had you doing more than just get coffee...). All I can think of to tell you is to join ASHRAE and get the books.
 
russ_watters said:
I'm an HVAC engineer. Honestly, nothing we can say can help you as much as your internship could (as long as they had you doing more than just get coffee...). All I can think of to tell you is to join ASHRAE and get the books.

Ok, thank you.

I am going to join ASHRAE right now. The internship was definitely helpful; I did A LOT more than just get coffee. lol

If anyone thinks of advice, whether it pertains to HVAC or engineering in general, PLEASE POST!

Thank you,

-Dan
 
join ashrae and knnow your limits
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...

Similar threads

Replies
3
Views
179
Replies
4
Views
5K
Replies
2
Views
4K
Replies
1
Views
1K
Replies
102
Views
5K
Back
Top