Why do Parallel Mirrors produce infinite mirrors?

AI Thread Summary
Parallel mirrors create the illusion of infinite images due to the continuous reflections between them. Each mirror reflects the image of the object, which then reflects back and forth, generating successive images. While technically not infinite, the rapid succession of images occurs so quickly that it appears to be infinite to the observer. The distance between the mirrors affects the time it takes for images to form, but even a small gap can produce a vast number of reflections in a short period. This phenomenon highlights the laws of reflection and the perception of images in a confined space.
MforceXXII
Messages
9
Reaction score
0

Homework Statement


Hi, I've got this question that is asking why mirrors placed in parallel will produce an infinite number of images.

Homework Equations



The Attempt at a Solution


What I think is that the image formed in the first mirror would reflect off the second mirror, forming a second image which would then reflect off the first mirror and so on.

The problem here is that I have no idea if this is correct (I couldn't find anything in my textbox or on the Net) and also , if it is correct, I need a clearer way of explaining it.

Thanks in advance!
 
Last edited:
Physics news on Phys.org
From where shall I start? Do you know the laws of reflection?

ehild
 
Plane Mirrors placed facing each other (parallel) actually does not produce infinite images, It will though in infinite time.
Say the guy with the phone in that picture leaned on one mirror while the other is placed just over a metre in front. His image(of his anterior aspect that is) will be formed after approximately 1/300,000,000 second. Image of his back will take a further 1/900,000,000 seconds more if he is one foot deep. Now in one second alone we have about 300,000,000 (300 million) images. After just half a minute you'll have enough images to keep you occupied for over 70 years if you can manage to count four images a second. Nothing said of the images behind you. Well, that seems like infinity to us.
 
Like this:

attachment.php?attachmentid=25335&stc=1&d=1272048884.png


Note that image1 is the place where the biggest reflection will be seen. This is the reflection of the object in the left mirror. image2 is the reflection of image 1 in the right mirror. The next image is the reflection of image2 in the left mirror again, but it's to the left and doesn't fit in the picture. The images you see. will be getting farther away and smaller.
 

Attachments

  • reflection.png
    reflection.png
    3 KB · Views: 3,643
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top