Will the Car Stop in Time to Avoid Hitting a Child in a School Zone?

  • Thread starter Thread starter Mitchtwitchita
  • Start date Start date
  • Tags Tags
    2d Car Kinematics
AI Thread Summary
In a scenario where a car is traveling at 40 km/h and a child runs onto the road 13 m ahead, the driver has a reaction time of 0.25 seconds before braking with a deceleration of 8.0 m/s². Calculations show that during the reaction time, the car travels approximately 2.5 m, leaving 10.5 m for the car to stop after braking. The total stopping distance of 12.5 m is less than the distance to the child, confirming that the car will stop in time to avoid hitting the child. The initial calculations were verified and corrected, ensuring the accuracy of the outcome. The conclusion is that the child will be safe as the car stops before reaching him.
Mitchtwitchita
Messages
187
Reaction score
0

Homework Statement



The speed limit in a school zone is 40 km/h (about 25 mi/h). A driver sees a child run onto the road 13 m ahead of his car. He applies the breaks, and the car decelerates at a uniform rate of 8.0 m/s^2. If the driver's reaction time is 0.25 s, will the car stop before hitting the child?



Homework Equations



d = Vot + 1/2at^2
V^2 = Vo^2 + 2ad



The Attempt at a Solution



40 km/h x [1000 m/1 km] x [1 h/3600 s] = 11 m/s

Vo = 11 m/s
X = ?
Xo = 0
a = -8.0 m/s^2
t = 0.25 s

X - Xo = Vot + 1/2at^2
X = (11 m/s)(0.25 s) + 1/2(-8.0 m/s^2)(0.25 s)^2
= 2.5 m

Vo = 11 m/s
V = 0
X = ?
Xo = 2.5 m
a = -8.0 m/s^2

V^2 = Vo^2 + 2a(X - Xo)
X = Xo + [V^2 - Vo^2/2a]
= 2.5 + [0 - (11 m/s)^2/2(-8.0 m/s^2)
= 10 m

Therefore, 2.5 m + 10 m = 12.5 m, and the car will stop in time.

Seems right, can anybody please verify this outcome?
 
Physics news on Phys.org
Dunno if I'm right, but this is how I see this problem.

First, I calculate the distance car has traveled in that 0.25 seconds

d=v*t=\frac{100m}{9s}*\frac{1s}{4}=\frac{25m}{9}

After that, the car slows down

v^{2}=v_{0}^{2}+2ad
0=\frac{100}{9}^{2}-2*8d
d=\frac{100*100}{81*2*8}

Now to sum up those 2 distances

d=\frac{25}{9}+\frac{10000}{1296}=\frac{13600}{1296}\approx10.5m

But once again, I don't know if I'm rigth (Although I agree the boy will live :biggrin:)
 
Oh, I see where I went wrong. No deceleration during the first part, and a constant velocity. Thank-you for your help!
 
You're welcome :D
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top