Yes, your calculations are correct.

  • Thread starter Thread starter petuniac
  • Start date Start date
AI Thread Summary
The discussion revolves around calculating the drop of a dart thrown at 7 m/s, accelerating at -0.3 m/s² over a distance of 4 m. The final velocity when the dart strikes the target is calculated to be 6.8 m/s, and the time to hit the target is determined to be 0.67 seconds. However, there is confusion regarding the time calculation, with some participants suggesting that the problem is poorly worded and may imply projectile motion rather than linear kinematics. The importance of precision in calculations is emphasized, as rounding errors can affect the accuracy of results. Overall, the participants agree that the method used is correct given the assumptions made about the problem.
petuniac
Messages
31
Reaction score
0
you are playing darts and are wondering how far the dart is dropping on its journey to the target which is 4 m away. The dart leaves your hand at 7 m/s and is accelerating at a rate of -0.3 m/s^2.

work so far...

find final velocity is x-direction from vf^2 = vi^2 + 2ad

vf = 6.8 m/s when dart strikes target

find time it takes to hit target from

vf = vi + at

t = 0.67 s

now, find displacement in y-direction from

d = vit + 1/2at^2
d = -2.2 m

is this correct?

thanks
 
Physics news on Phys.org
The method looks good, the time does not.
 
It seems like linear kinematics! Really, I would have thought something like this would be projectile motion.
 
QuantumCrash said:
It seems like linear kinematics! Really, I would have thought something like this would be projectile motion.
It is projectile motion, but with a retarding force. The question is poorly worded because it is not specific about the direction of the given acceleration, or the initial velocity. It clearly does not include the gravitational acceleration in what is given, so the asumption that it is a horizontal acceleration of -0.3m/s^2 is most likely what they expected. Since no initial angle was specified, and they are asking for "dropping" distance, a horizontal initial velocity was likely intended.
 
thanks for the replies... please see my comments below

1) why does the time not look correct? I re-did the calculation with the same result

vf = vi + at
6.8 = 7 + (-0.3)t
t = (6.8-7)/-0.3
t = 0.67 s

2) this problem was given as part of linear kinematics...

3) so am I doing this correctly??

thanks!
 
petuniac said:
thanks for the replies... please see my comments below

1) why does the time not look correct? I re-did the calculation with the same result

vf = vi + at
6.8 = 7 + (-0.3)t
t = (6.8-7)/-0.3
t = 0.67 s

2) this problem was given as part of linear kinematics...

3) so am I doing this correctly??

thanks!
You rounded off too much computing the 6.8m/s. The difference between the two velocities is too small to get an accurate time unless you keep more digits. You could of course argue that the problem did not give the initial velocity very accurately, but when they say 7 they really mean 7.00000000000000000000000000000000. You are doing it correctly for the assumptions I outlined earlier. It's really a poorly worded problem. I think you did what was intended.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.

Similar threads

Replies
5
Views
2K
Replies
6
Views
1K
Replies
34
Views
3K
Replies
1
Views
1K
Replies
2
Views
4K
Replies
6
Views
1K
Replies
1
Views
2K
Back
Top