How Do I Interpret Multimeter Units Correctly?

AI Thread Summary
The discussion revolves around interpreting multimeter readings, specifically regarding the measurement of AC and DC currents. The user is uncertain if their multimeter reading of "2.95" is in milliamperes, especially since the model does not measure AC current. After testing with known resistors, it becomes clear that readings labeled with 'm' indicate milliamps, leading to the conclusion that 2.95 is indeed in milliamps. The user emphasizes the importance of verifying measurements to ensure accuracy and understanding of the multimeter's functions. Overall, the thread highlights the need for careful interpretation of multimeter units to avoid confusion.
Cspeed
Messages
44
Reaction score
0
I am trying to make sure that the data I read off my multimeter has the right units.

I have a multimeter that is a similar model to this one:
http://www.tequipment.net/BK2703B.html
You can enlarge the image to see the settings.

When I measure AC current, my result says "2.95" when the setting is on 20m/10A, using the mA and COM ports (this model doesn't seem to have AC current, but the DC current has the same label). Is it 2.95 milliamperes?

Thanks.
 
Engineering news on Phys.org
I hate autoranging.

Put a known resistor on battery (know current) and see what the meter says.
 
This is odd. I'm just using V = I*R, with .235 V, 38.3 ohms, and it should be .00671 amps. I put the meter on 20m/10A, and it spit out 2.71. That's still in the milliamp range, but I'm just not sure if I want to trust it. I'd hate to have done all the work getting these results, just to use the wrong units.

Does anyone know for sure how to interpret the results? I hope AC doesn't have any affect on it.
 
It looks like the impendance of your meter is comparable with 38 ohms, when in 20mA mode. That would reduce the current you actually get.

Try a 9V battery with a 1k or 10k ohm resistor and see what you get.

EDIT: I just realized something. 2.71 A is way over the range of a 20mA range setting. So it must be 2.71 mA ... but checking things out by doing a measurement like you are doing is definitely a good thing, it helps you learn about and become more familiar with your meter.
 
Last edited:
2.95 should be mA, but I would think that since the meter doesn't measure AC current, it is just a bogus reading.
 
The one I linked to isn't the model I have - mine does measure AC (it has a switch for Ac/DC).

After some more testing it seems that any of the settings that are labeled with an 'm' like 20m or 200m are measured in milliamps. Thanks for your help.
 
I'd recommend having a read-over of the manual for your particular multimeter:
http://www.bkprecision.com/

(That's assuming it's actually manufactured by BK Precision)
 
I've looked over the manual - no help in there. I think I'm safe to assume it was .00295 Amps.
 
russ_watters said:
2.95 should be mA, but I would think that since the meter doesn't measure AC current, it is just a bogus reading.

this
 

Similar threads

How does a digital multimeter measure conductance?
Replies
14
Views
5K
Multimeter Peak Voltage Reading
Replies
9
Views
7K
Odd multimeter readings with AC->DC wall adapter
Replies
8
Views
4K
Understanding current measurement on an irregular waveform
Replies
3
Views
2K
B Why does my LC circuit not oscillate its energy between Electric & Magnetic fields?
4
Replies
152
Views
6K
How Do I Interpret the Resistance Range on My Digital Multimeter?
Replies
4
Views
14K
Why did the multimeter leads arc?
Replies
5
Views
5K
Resistive heating power AC vs rectified AC/DC
Replies
10
Views
4K
Bridge Rectifiers: How Do They Work?
Replies
6
Views
3K
What voltage/current/power meter do you use in your (hobby) projects?
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top