Where did i go wrong in fudingin the temperature of the gold cube?

AI Thread Summary
The discussion revolves around calculating the temperature increase of a gold cube after being connected to a capacitor. The initial calculations involve determining resistance, charge, current, and energy, but the approach is criticized for being overly complex. A simpler method suggested is to directly use the energy stored in the capacitor to find the temperature change in the gold. The energy stored can be calculated using the capacitance and voltage, leading to a more straightforward solution. Ultimately, the focus is on simplifying the calculations to accurately determine the final temperature of the gold cube.
yjk91
Messages
73
Reaction score
0

Homework Statement



A cube of gold (resistivity ?R = 2.44 10-8 O m, density ?D = 1.93 104 kg / m3, and specific heat c = 129 J / kg °C) that is 3.5 mm on a side is connected across the terminals of a 40-µF capacitor that initially has a potential difference of 340.0 V between its plates.

http://www.webassign.net/bauerphys1/26-p-052.gif

(b) When the capacitor is fully discharged, what is the temperature of the gold cube? (Use 20°C for room temperature.

The Attempt at a Solution



i found R = p L /A

and got 0.69714 * 10^-5 ohm

Q = C *V = 40 *10^-6 * 340 V = 136 * 10^-4 C

I = V/R = 340 / (0.69714 * 10^-5) = 487.7066 * 10^5 A

time t = Q/I = 136*10^-4 / (487.706*10^5) = 0.27885 * 10^-9s

E = V^2t/R = 340^2(0.27885*10e-9) / 0.69714e-5
= 4.6239 J

m = density * volume = 1.93 * 10e4 * 3.5*e-3^3 =82.74875e-5 kg

E = mc delta T

T = E/(mc) = 4.6239 / (82.74875e-5*129) = 43

Tf = 43+20= 63mm where did i go wrong?
 
Physics news on Phys.org
You're taking the long way around to calculate the energy deposited in the gold, and there are some assumptions being made that look somewhat dubious.

Why don't you assume that all the energy initially stored in the capacitor will be dumped into the gold (the capacitor will have zero charge, thus zero energy when its fully discharged, so that energy must have gone into heating the gold).

Given the capacitance and voltage, what's the energy stored in the capacitor?
 
sweet i got it thx
 
gneill said:
You're taking the long way around to calculate the energy deposited in the gold, and there are some assumptions being made that look somewhat dubious.

Why don't you assume that all the energy initially stored in the capacitor will be dumped into the gold (the capacitor will have zero charge, thus zero energy when its fully discharged, so that energy must have gone into heating the gold).

Given the capacitance and voltage, what's the energy stored in the capacitor?



hey Gneli
could you help me with this problem? i just need a place to start and some guidance

thank you
https://www.physicsforums.com/showthread.php?p=3419623#post3419623
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top