Applying Newtons laws ( Equilibrium)

AI Thread Summary
A loudspeaker weighing 26.21 kg is suspended by two cables, and the problem involves calculating the tension in these cables. The speaker's position creates a right triangle, with the cables forming equal angles of approximately 17 degrees with the ceiling. To find the tension, the vertical component of the tension must equal half the weight of the speaker, which is 26.21 kg multiplied by 9.8 m/s², divided by the sine of 17 degrees. The horizontal components of the tension must also balance, confirming that the system is in equilibrium. Understanding these components is crucial for solving the problem accurately.
sktgurl930
Messages
21
Reaction score
0

Homework Statement


A 26.21 kg loudspeaker is suspended 1.15 m below the ceiling by two 3.91-m-long cables that angle outward at equal angles. What is the tension in the cables?

Homework Equations


I have no idea


The Attempt at a Solution


well i know that i have the weight which is 26.21 kg and how far its is from the ceiling
and that I am trying to find N but i just don't kno wat equation to use but once i find N would i have to divide by 2 since there's 2 cables??
 
Physics news on Phys.org
sktgurl930 said:

Homework Statement


A 26.21 kg loudspeaker is suspended 1.15 m below the ceiling by two 3.91-m-long cables that angle outward at equal angles. What is the tension in the cables?

Homework Equations


I have no idea

The Attempt at a Solution


well i know that i have the weight which is 26.21 kg and how far its is from the ceiling
and that I am trying to find N but i just don't kno wat equation to use but once i find N would i have to divide by 2 since there's 2 cables??

Figure what angles the cables make holding the speaker first.

Then draw your vector diagram of the tensions and resolve the x and y components. You know the X direction components must add to 0 and the Y components muust add to the 26.21 kg.
 
ok so would the angles be 17 since they are equal angles??

and i got 17 by making a right triangle with 3.91 being the hypotenuse, and since the speaker is 1.15m away from the ceiling making that one of the sides of the triangle with the right angle.

im i right?? or totally off
 
im not going to lie I am teacher isn't very good at teaching
so i have no idea wat ur talkin about with x and y

please don't hate me
 
sktgurl930 said:
ok so would the angles be 17 since they are equal angles??

and i got 17 by making a right triangle with 3.91 being the hypotenuse, and since the speaker is 1.15m away from the ceiling making that one of the sides of the triangle with the right angle.

im i right?? or totally off

That would be correct. It is 17 degrees. I get 17.1, but that's close enough.

So now you know that 1/2 the weight 26.21kg * 9.8 m/s2 is carried by the vertical component of the tension in the cable. As you noted each cable will carry 1/2.

If that vertical force must be carried in the cable then the tension must be = 1/2 weight/Sine(17).
(Answer in Newtons)

That treats the Tension as having 2 force components. One vertically (you found) and the other horizontally (given by 26.21*(Cos(17)). When added together as you would add vectors, that adds to the answer you just found. Since the speaker is not in motion, you know that the horizontal components are equal and opposite.

Another way to find the answer would be to recognize that

9.8*26.21*(1/2)/1.15 = Total Tension/3.91

This would be because the definition of Sine is Vertical over hypotenuse and those forces must remain in the same ratio, so ... you can exploit that as the quick way to calculate it as like ratios.
 
thank u and i wish u were my teacher dude ur a life saver!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top