Build a Solar Powered Car: Ideas Needed!

  • Thread starter Thread starter Olivia
  • Start date Start date
  • Tags Tags
    Car Solar
AI Thread Summary
To build a solar-powered car that either travels 10 meters quickly or climbs a steep ramp, the focus should be on optimizing speed. The project includes 8 solar cells and a motor, with no size restrictions on the car. Using lightweight materials, such as thin balsa wood, can help reduce mass and increase speed. Researching effective gear ratios is essential for maximizing wheel performance, as gears are not provided. Overall, careful planning and material selection will be crucial for success in this project.
Olivia
Messages
3
Reaction score
0
I have to build a solar powered car that will either a) travel a distance of 10 meters in the least time . or b) climb a meter on the stepest ramp possible. I am not sure which one would be easier to accomplish or what materials to use. I am also wondering how exactly i am going to build this thing. Any ideas would be greatly appreciated!
 
Physics news on Phys.org
I'd go with the ten meters in fastest time bit. Have you been provided materials by your instructor, and do you have specific guidlines you have to abide by?
 
well we are provided with 8 2.5cm x 7.5cm solar cells and a motor, but we are free to use any materials we like and the car does not have any size limitations, there are so many options so i just don't quite know what would work best!
 
I'll ask around about standard gear ratios, but your best option on the car would be to string the solar panels in a line taking up the least area possible on a board of the thinnest balsa wood you can find. Reducing the total mass will increase your speed.

Are you provided gears with which to operate the wheels? Do a little research on what type of gear ratio would be best (make the wheels go fastest, etc.).
 
No, we aren't provided with any gears, but i will do some reasearch to see what would work best, thankyou for your help!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top