Calculate Current & Resistance of 4.5V Battery & 12Ω Resistor

AI Thread Summary
To calculate the current in a circuit with a 4.5V battery and a 12Ω resistor, Ohm's Law indicates that the current is determined by the voltage across the resistor. Given that the potential difference across the resistor is 3V, the current can be calculated as 3V / 12Ω, resulting in 0.25A. The internal resistance of the battery can be found by subtracting the voltage across the resistor from the total voltage of the battery, leading to a voltage drop of 1.5V across the internal resistance. Using the current calculated, the internal resistance can be determined by dividing the voltage drop across it by the current, resulting in an internal resistance of 6Ω. Understanding these calculations is crucial for analyzing circuits with internal resistance.
faisal
Messages
46
Reaction score
0
A battery of e.m.f. 4.5V is connected across a 12 ohm resistor, if the Pd. Across the resistor is 3V calculate
a)the current in the circuit ?
b)internal resistance of the battery?
iv tried my best but i can't do it
 
Physics news on Phys.org
a) using the resistor, remember ohms law.
b) if the resistor is using 3v what is the internal resistance taking, and also remember that is a series circuit, so what is the same throughout.
 
I Still don't understand here's my answer
a)2/9.5=0.2 amps
b)0.2X 9.5= 1.9v (V=IR)
 
i DONT understand this example given to me
q.1 A 9v battery with an internal resisrance of 0.1 ohms is connected to a 3 ohm resistance. What current flows across the circuit and what is the P.D. across the terminals of the battery
E=I(R+r)
I=E/(R+r)
answer 2.9A (i understand this part)
PD across battery= VR= (9-.29)=8.7V where on Earth did 0.29 come from?
 
faisal said:
i DONT understand this example given to me
q.1 A 9v battery with an internal resisrance of 0.1 ohms is connected to a 3 ohm resistance. What current flows across the circuit and what is the P.D. across the terminals of the battery
E=I(R+r)
I=E/(R+r)
answer 2.9A (i understand this part)
PD across battery= VR= (9-.29)=8.7V where on Earth did 0.29 come from?

the 0.29 is the voltage lost to the internal resistance of the battery.

I*internal resistance = 2.9*0.1 = 0.29 Volts.
 
faisal said:
I Still don't understand here's my answer
a)2/9.5=0.2 amps
b)0.2X 9.5= 1.9v (V=IR)

I'm a little puzzled where the 9.5 and the 2 have come from.

If the resistor is 12ohms and is taking 3V, then you can find the current flowing through it, and hence the circuit as all components are in series.

By knowing that there is a supply of 4.5V and the resistor is taking 3V, you can find what PD the internal resistance is taking, and by working out the circuit current in question a), you will find the that internal resistance value.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top