Calculate Speed at Top of Roller Coaster 2nd Hill (5.5m)

AI Thread Summary
The discussion focuses on calculating the speed of a roller coaster at the top of a second hill, which is 5.5 meters high, after ascending an 18-meter lift hill at 2.50 m/s. The calculations involve potential and kinetic energy, leading to a speed of 15.9 m/s at the top of the second hill. Participants agree that the mass of the coaster does not affect the outcome due to the constant acceleration from gravity. The final answer is confirmed as correct by other users in the thread. The problem illustrates the principles of energy conservation in roller coaster dynamics.
cowgiljl
Messages
63
Reaction score
1
The mass of the coaster is 800 kg
The lift hill is 18 m highabd it goes up the lift hill at 2.50 m/s
The second hill is 5.5m high.

Wants to know the speed at the top of the second hill.
do i really care about the weight of the car?

This is what i have so far

PEtop1 +KEtop1 = KE bott
2*9.80*18 +2.5^2 = v^2 bott
V bott = 18.9 m/s

second formula was
Ke bott - Pe top1 = KE top 2
18.9^2 - 2*9.80*5.5 = V^2 top 2

Vtop 2 = 15.9 m/s and that is my final answer is that look right

thanks
 
Physics news on Phys.org
Yep...answer looks right to me.
 
thanks

thanks hindi
 
I believe the mass doesn't matter in this problem because the coaster is under constant acceleration for the whole run (gravity).
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Minimum safe height for a roller coaster
Replies
10
Views
5K
Speed at the top of an elliptical roller coaster loop
Replies
4
Views
3K
Roller coaster problem involving velocity
Replies
2
Views
2K
Solving for Speed on a Roller Coaster's Top of Hill
Replies
6
Views
18K
Kinetic and Potential Energy on a roller coaster
Replies
5
Views
3K
A different type of roller coaster loop problem
Replies
16
Views
2K
How Is the Force on a Child in a Roller Coaster Calculated?
Replies
3
Views
7K
Determining speed and height on a roller coaster
Replies
6
Views
6K
Minimum Speed for a Roller-Coaster Car to Complete a Loop without Seat Belts
Replies
12
Views
3K
Why does the speed change at the bottom of the loop-the-loop?
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top