Calculating Cable Angles for Suspended Beam

AI Thread Summary
To find the resting angles of the cables supporting a beam with two weights, the tensions T1 and T2 in the cables must be analyzed. The x-components of the tension must cancel out, leading to the equation T1x = T2x. The y-components must balance the weights, resulting in T1y + T3y + W1 = 0 and T2y + T3y + W2 = 0. Given the weights W1 and W2, along with the angle B, the calculations can be simplified to determine the angles θ1 and θ2. The problem emphasizes achieving a stable, resting position for the system.
3wt Man
Messages
3
Reaction score
0
I have a beam suspended by two cables with two weights suspended by the beam. The weight of the beam is negligible. How would I find the resting angles of the cables.
 

Attachments

Physics news on Phys.org
Take T1 to be the tension in one cable, T2 the tension in the other. Take \theta1 to be the angle the first cable makes with the horizontal, \theta2 to be the angle the second cable makes. You can calculate the x and y components of both tension vectors in terms of T and \theta. You know what the y component of each must be- they are given. You know that the x components must cancel, because the beam does not move left or right.
 
This is not a homework problem!
It has been so long since I did anything like that.
I have
T1x=T2x
T1y+T3y+W1=0
T2y+T3y+w2=0

Then I get lost
 
Okay I worked it out again, I finally get to a point where a Angle C = something Angle A.
This needs to be in a resting position and that is where my problem is.
W1=350lbs W2=650lbs B=20Deg
 

Attachments

Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Weight held by a beam and cable
Replies
2
Views
1K
Tension and net torque in a cable
Replies
10
Views
5K
Seemingly simple equilibrium problem - force balance
Replies
6
Views
2K
Torque and rotational equilibrium question
Replies
6
Views
4K
How Do You Calculate Tension in a Cable and Force on a Hinge?
Replies
2
Views
4K
Solve Static Equilibrium: Beam, 520N Force, Cable Tension
Replies
2
Views
2K
Tension and Hinge Force Problem
Replies
5
Views
7K
Equilibrium: max distance traveled; undisturbed tension
Replies
3
Views
2K
Finding the angle at the apex of a rhomb with incoming linear wave
Replies
12
Views
2K
Help equlibrium, torque, tension problem?
Replies
2
Views
6K

Hot Threads

Recent Insights

Back
Top