Can I use this solution? Angular motion

AI Thread Summary
The problem involves a wheel starting from rest with a constant angular acceleration of 3.0 rad/s², turning through 120 radians during a specified 4.0-second interval. The initial calculations incorrectly determine the total time to reach 120 radians as 8.49 seconds, which does not account for the 4.0-second interval. The correct interpretation is that the wheel accelerates for an unknown time t before continuing for 4 seconds, during which it covers an additional 120 radians. The discussion highlights the need to differentiate between the total time to reach a certain angular displacement and the specific time interval during which that displacement occurs. The final goal is to find the time t before the 4.0 seconds, leading to a clearer understanding of the motion involved.
OrlandoLewis
Messages
25
Reaction score
1

Homework Statement


Starting from rest, a wheel has constant α = 3.0 rad/s2. During a certain 4.0 s interval, it turns through 120 rad. How much time did it take to reach that 4.0 s interval?

ω0 = 0
α = 3.0 rad/s2
θf = 120 rad

Homework Equations


Δθ = ω0⋅t + ½αt2

The Attempt at a Solution


120 rad = (1/2)(3.0 rad/s2)(t2)
Solving for t:
t = [2(120 rad) / (3.0 rad/s^2)]½
t = 8.49 s
Subtracting 4.0 s to the said time leads to my final answer, 4.9 s

The book says that the answer should be 8.0 s.
 
Physics news on Phys.org
It says "during a certain 4.0s interval " it could be between any time interval.Your equation describes us what is the time when it makes 120 rad we are not looking for that,we are looking for a time interval which object makes 120 rad.
Can you see the difference ?
 
During the given interval, Δθ = 120 rad. But that's not measured from the starting point.

You found the time it takes to go from the starting point to θf = 120 rad, which is a different problem.

Set up two equations.

Edit: Oops, didn't see that Arman777 just said the same thing. :-)
 
Arman777 said:
It says "during a certain 4.0s interval " it could be between any time interval.Your equation describes us what is the time when it makes 120 rad we are not looking for that,we are looking for a time interval which object makes 120 rad.
Can you see the difference ?
It's still pretty vague to me from how you said it. So I'll try to explain as far as I can understand.

At the beginnig it starts to accelerate up to a certain velocity. From that point up to 4 seconds, the said theta is measured until 210 radians.
Is that how I should interpret the problem?
 
OrlandoLewis said:
It's still pretty vague to me from how you said it. So I'll try to explain as far as I can understand.

At the beginnig it starts to accelerate up to a certain velocity. From that point up to 4 seconds, the said theta is measured until 210 radians.
Is that how I should interpret the problem?

It made some rad ##θ_1## between ##t=0## and ##t_1##,
After 4 sec, which let's call is ##t_2## (or ##t_1+4##) it makes ##θ_2## rad (between ##t_2## and ##t=0##)
In between those time intervals (##t_2## and ##t_1##) it makes ##120## rad.
 
Arman777 said:
It made some rad ##θ_1## between ##t=0## and ##t_1##,
After 4 sec, which let's call is ##t_2## (or ##t_1+4##) it makes ##θ_2## rad (between ##t_2## and ##t=0##)
In between those time intervals (##t_2## and ##t_1##) it makes ##120## rad.
Yes, but I feel it could be expressed yet more clearly.
It accelerates at 3 rad s-2 from rest for some time t, turning through some angle in the process. Continuing with the same acceleration for another 4 seconds it turns through a further 120 radians. Find t.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...

Similar threads

Back
Top