Carbon Dioxide Extraction Inquiry

AI Thread Summary
The discussion centers on the purification of carbon dioxide as a waste product from industrial processes, specifically its transformation into liquid form. Key points include the need for resources detailing the materials and energy involved in this conversion process. The conversation highlights the relevance of this information to the dry cleaning industry, as liquid CO2 is utilized in that sector. Links to fact sheets and projects from companies like Linde Gas are shared, emphasizing their significance in providing insights into CO2 purification and its applications.
makethings
Messages
93
Reaction score
0
Hi. I am trying to find information with no luck on google. I am hoping someone here can help point me to any articles or books that talk about how carbon dioxide is taken as a waste residue from an industrial process and purified, and turned into liquid carbon dioxide. But the focus is on how it goes from bad waste gas to clean liquid form. I am particularly interested in the materials and energy that are associated with doing this.
 
Chemistry news on Phys.org
Liquid? Or solid?
 
This is fantastic thanks. this is part of some research I'm doing on the dry cleaning industry and since one of those links is from linde gas which is a supplier of CO2 to the dry cleaning industry it makes it all the more perfect.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top