Complete Combustion: Higher vs Lower Air Temp

  • Thread starter Thread starter engineering
  • Start date Start date
  • Tags Tags
    Combustion
AI Thread Summary
Higher temperature air is less dense, resulting in fewer moles of oxygen available for combustion compared to colder air, which is denser and contains more oxygen per volume. Consequently, less air is needed for complete combustion at lower temperatures. The relationship between air temperature and combustion efficiency is influenced by factors such as pressure and humidity. The original inquiry about whether higher temperature air provides more air for combustion was clarified, emphasizing that it does not. Understanding these dynamics is crucial for optimizing combustion processes.
engineering
Messages
12
Reaction score
0
If i am trying to burn a fuel in air am i right in saying if i have a higher temerature compared to a lower temperature of air, the higher temperature air has more moles of air to burn than the lower temperature air for complete combustion to occur?
 
Engineering news on Phys.org
How much air? A constant mass? Constant volume?

At a given pressure, air is less dense at higher temperature (less mass per unit volume).
 
In general, yes. Cold air is denser (all else being equal), and therefore has more O2 molecules per volume, and so less air (by volume) is required to accomplish the same combustion. This of course does not hold true if the "all else" is not equal. Ari pressure has a significant effect and humidity can make a huge difference.
 
LURCH said:
In general, yes.

The OP asked whether having a higher temperature provided more air for combustion. That's clearly not true.
 
Ah yes; I read it as saying higher temperature requires more air, but upon re-read, I see that was almost the oposite of the poster's intent.

Engineerign, higher temperature air is thinner and contains less O2 than colder air (again, all else being equal), and therefore provides a better comustion reaction.
 
It's not that a higher temperature air contains less 02, it is simply less dense. Since you are dealing with a constant volume device, then the lower density means less air (coincidentally less O2).
 
Hi there:

Here is a free MS Excel spreadsheet on combustion -- http://engware.i-dentity.com/pf/combustion.xls.

For any fuel and oxidant combustion scenario whwre stoichiometry is => 1, one can calculate the combustion flame temperature, combustion products composition on both weight and mole basis, stoichiometry and stoichiometric ratio.

Thanks,

Gordan
 

Similar threads

Replies
2
Views
1K
Replies
58
Views
6K
Replies
4
Views
1K
Replies
5
Views
2K
Replies
16
Views
5K
Replies
5
Views
6K
Back
Top