Conservation of Energy, Momentum

AI Thread Summary
The discussion centers on a physics problem involving the conservation of energy and momentum in a system where a bullet passes through a pendulum bob. The minimum speed required for the pendulum bob to reach the top of its arc is calculated, along with the bullet's speed before impact and the force in the rod after the bullet exits. The force in the rod is determined to be 58.8N, which combines the centripetal force and the gravitational force acting on the bob. There is confusion regarding the direction of forces at the bottom of the pendulum's swing, specifically whether gravitational force should be considered negative. Clarification is sought on how these forces interact to yield the correct tension in the rod.
abpandanguyen
Messages
32
Reaction score
0

Homework Statement


A bullet of mass m = .010 kg and speed v passes completely through a pendulum bob of mass M = 1.2 kg. The bullet emerges with a speed of v/2. The pendulum bob is suspended by a rigid rod of length l = 0.50 m and negligible mass that can pivot about the center point.


What minimum speed vp must the pendulum bob have to just make it to the top of the arc at point A (top of the circle, pendulum starting at the bottom)?

What is the speed of the bullet just before hitting the pendulum bob for the situation described in part a?

What is the magnitude of the force in the rod just after the bullet emerges?



Homework Equations



Fr = mv2/r

The Attempt at a Solution


I solved for parts a and b already, and I also got C (answer is 58.8N), but I'm having trouble understanding why this number is the answer. At the bottom of the circle would the magnitude of the force in the rod be:

Fr + mg?

that gets the answer, but aren't these forces going in different directions at the bottom of the circle?
 
Physics news on Phys.org
Fr = mv2/r is the centripetal force required to keep the bob on the string. Since tension must provide this centripetal force and counteract gravity, T=mv^2/r + mg.
 
ideasrule said:
Fr = mv2/r is the centripetal force required to keep the bob on the string. Since tension must provide this centripetal force and counteract gravity, T=mv^2/r + mg.

if it was counteracting gravity, doesn't that mean it would be - mg? I don't think I'm quite understanding here.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top