Could someone please read through my working out?

  • Thread starter Thread starter NotVerySmart
  • Start date Start date
AI Thread Summary
The discussion focuses on a physics problem involving the conservation of momentum after a space vehicle separates into two sections. The user seeks validation of their calculations, which indicate a velocity of 3.84 m/s for the heavier section post-separation. However, other participants express confusion regarding the problem's setup, questioning the accuracy of the velocities and the masses involved. They highlight that if the lighter section has more momentum, the heavier section should have less, which contradicts the expected outcome of such maneuvers. Clarification on the problem's parameters is requested to ensure accurate calculations.
NotVerySmart
Messages
6
Reaction score
0

Homework Statement



Could someone please read through my work to make sure I have worked this out correctly, please see the images below for my working out.

A space vehicle traveling at a velocity of 6000km/h separates by detonation of explosive bolts, into two sections of mass 1200 kg and 300 kg. The two parts continue moving in the same direction with the lighter section moving at 6200km/h. Making use of the principle of conservation of momentum, determine the velocity of the heavier section after separation

Homework Equations



upload_2018-1-21_14-7-10.png
[/B]

The Attempt at a Solution



upload_2018-1-21_14-8-59.png
 

Attachments

  • upload_2018-1-21_14-7-10.png
    upload_2018-1-21_14-7-10.png
    30.3 KB · Views: 484
  • upload_2018-1-21_14-8-59.png
    upload_2018-1-21_14-8-59.png
    37.9 KB · Views: 458
Physics news on Phys.org
Please see my working for

^M=mx^v

^M= 7140000
m= 1860000
^v= 3.84 m/s
 
Which problem do you need help on? The problem in post #1 makes little sense. If the ejected mass has more momentum than before, then the space vehicle will have less momentum than before. Usually, this type of maneuver is intended to boost the momentum of the space vehicle. Are you sure that the velocities are correct and relative to the lab frame?
NotVerySmart said:
Please see my working for

^M=mx^v

^M= 7140000
m= 1860000
^v= 3.84 m/s
I am not sure I understand what you are asking us to do here. Are these new masses? Please explain.
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top