Cylinder rolling on fixed cylinder

  • Thread starter Thread starter Snehit
  • Start date Start date
  • Tags Tags
    Cylinder Rolling
AI Thread Summary
The discussion centers on deriving the equations of motion for a cylinder rolling on a fixed cylinder, with a focus on the condition when the normal force becomes zero. The user has formulated a differential equation but is unclear about the variables 'a' and 'b,' which are not defined in the problem statement. There is an emphasis on ensuring the kinematics are accurately understood, as this is a common area where mistakes occur. The urgency of the request is highlighted by the user's upcoming test. Clarifying the definitions of 'a' and 'b' is crucial for solving the problem effectively.
Snehit
Messages
3
Reaction score
0
Check Attached file for questionI am not able to get the equations for motion. Except that when cylinder loses contact, the normal force is zero.Please answer this fast. Need it for a test tomorrow. Thanks a lot!
 

Attachments

  • Capture.PNG
    Capture.PNG
    7.7 KB · Views: 561
Physics news on Phys.org
Ok, I tried the question for some time and came up with this differential equation,

\ddot{\theta} + \frac{2g}{3(a+b)} \sin(\theta) = 0
 
What are a and b; they do not appear in the problem statement.

Did you get the kinematics correct? This is where most people get off track on a problem of this sort, so look very closely at that aspect.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top