Does pressure change along a vertical path with pressurized fluid at 70psi?

  • Thread starter Thread starter Kaly
  • Start date Start date
  • Tags Tags
    Pressure Value
AI Thread Summary
Pressure in a closed-loop system with pressurized fluid will change with vertical height due to the effects of gravity, even if the fluid is initially pumped at 70 psi. As the fluid rises or falls, the pressure at any point in the system will be influenced by the height of the fluid column above it. The pressure increases with depth, similar to how underwater pressure works. The configuration of the system, including the pump and tank placement, plays a significant role in determining the pressure changes. Overall, vertical movement of the fluid will result in pressure variations, regardless of whether the system is closed or open.
Kaly
Messages
8
Reaction score
0
Hello, I am willing to know if the value of pressurized fluid along a rectangular path placed normal to ground (let's say 2 stories high) would show any change in pressure along the lines normal to ground. I am not worried where fluid would move horizontal to ground but what would happen when it rises or falls? would pressure change? or remain same if it is pumped at 70psi pressure let's say.
 
Engineering news on Phys.org
Kaly said:
Hello, I am willing to know if the value of pressurized fluid along a rectangular path placed normal to ground (let's say 2 stories high) would show any change in pressure along the lines normal to ground. I am not worried where fluid would move horizontal to ground but what would happen when it rises or falls? would pressure change? or remain same if it is pumped at 70psi pressure let's say.

Welcome to the PF.

Could you please post a sketch of the configuration of the tank and pump? Fluid pressure increases as you go deeper in the vertical direction, just as you experience a greater pressure as you dive deeper underwater. Is that what you are asking about?
 
Thank you for the comment. Path is rectangular in shape. but it is closed loop so not really exposed to atmosphere. The pump sits on ground. It first pushes liquid 2 stories high. At the top fluid then it follows horizontal path then the fluid falls by 2 story height and again it flows though horizontal path, reaches the pump and is pumped again 2 story high. I am not sure if not being exposed to atmosphere keeps the value of pressure same through out the path? or no matter the system being closed or open the vertical height of water column would add to pressure at ground level.
 
How much formal Fluid Mechanics training have you had? If you had a course, what was covered?
 
Kaly, Is this a real system or just a problem someone has given to you?
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Thread 'What's the most likely cause for this carbon seal crack?'
We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
Back
Top