Energy in simple harmonic motion

AI Thread Summary
The discussion focuses on a harmonic oscillator's energy dynamics, specifically when elastic potential energy equals kinetic energy. It is established that this condition occurs four times per cycle, with the time between occurrences calculated as π/(2w). When the displacement is A/2, the fractions of total energy are determined to be 3/4 kinetic and 1/4 potential. Participants clarify the use of trigonometric functions and the importance of considering multiple solutions for the equations involved. Overall, the thread emphasizes understanding the relationships between displacement, velocity, and energy in simple harmonic motion.
kjartan
Messages
15
Reaction score
1

Homework Statement




This is my first post here.
I'm particularly unsure about b(ii)
Thanks for any and all replies!
I apologize in advance if I haven't used the correct conventions, but I hope that this is legible. I will learn the correct conventions for future posts but was pressed for time here.

Question:

A harmonic oscillator has angular frequency w and amplitude A.

(a) What are the magnitudes of the displacement and velocity when the elastic potential energy is equal to the kinetic energy? (assume that U = 0 at equilibrium)

(b) (i) How often does this occur in each cycle?
(ii) What is the time between occurrences?

(c) At an instant when the displacement is equal to A/2, what fraction of the total energy of the system is kinetic and what fraction is potential?


Homework Equations



E = (1/2)mv^2 + (1/2)kx^2 = (1/2)kA^2





The Attempt at a Solution




(a) (1/2)mv^2 = (1/2)kx^2 --> x = +/- A/rad(2)

v = rad(k/m)*x = rad(k/m)*[A/rad(2)]


(b) (i) 4 times

(ii) x = Acos(wt + phi), choose phi = pi/2

so, x = Asin(wt)
x/A= sin(wt)
t = (1/w)arcsin(x/A)

subst. from (a) gives us t = (1/w)arcsin(1/rad(2)) = (1/w)*(pi/4)

So, change in t = pi/(2w)

(c) E = K + U

U = (1/2)kx^2 = (!/2)k(A/2)^2 = k(A^2/8)

K = k(A^2/2) - k(A^2/8) = k(3A^2/8)

so, K/E = 3/4 --> U/E = 1/4
 
Physics news on Phys.org
kjartan said:
(a) (1/2)mv^2 = (1/2)kx^2 --> x = +/- A/rad(2)

v = rad(k/m)*x = rad(k/m)*[A/rad(2)]

OK. Note that you also have 2 solutions for v: v=\pm \sqrt{k/2m}A (click on the equation if you want to see the code that generates it). Then you take the magnitude of each, as the problem asked you to. Since this is a 1D problem, the magnitude of a vector is just the absolute value.

(b) (i) 4 times

Agree.

(ii) x = Acos(wt + phi), choose phi = pi/2

so, x = Asin(wt)
x/A= sin(wt)
t = (1/w)arcsin(x/A)

subst. from (a) gives us t = (1/w)arcsin(1/rad(2)) = (1/w)*(pi/4)

So, change in t = pi/(2w)

I agree with your change in t, but I'm not so sure you want to use the arcsin function here. The arcsin function is too restrictive to capture all the solutions of the trigonometric equation, as its range is only [-\pi /2,\pi /2].

By the way, you don't need to choose a value of \phi. You could also do it like this.

A\cos(\omega t+\phi )=\pm\frac{A}{\sqrt{2}}

\omega t+\phi=...\frac{\pi}{4},\frac{3\pi}{4},\frac{5\pi}{4},\frac{7\pi}{4}...

\omega t+\phi=\frac{(2n+1)\pi}{4}, n\in\mathbb{Z}

Now take the t values for any two adjacent n, and subtract the smaller from the greater. \phi will subract off without you having to choose a value for it.

(c) E = K + U

U = (1/2)kx^2 = (!/2)k(A/2)^2 = k(A^2/8)

K = k(A^2/2) - k(A^2/8) = k(3A^2/8)

so, K/E = 3/4 --> U/E = 1/4

That is correct.
 
Thanks much, Tom, your reply was most helpful and I appreciate it!

Thanks for the tip about LaTex, too.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top