Explain this terminology Steel Cord?

AI Thread Summary
Steel cord typically refers to the steel reinforcement used in tires, which consists of steel wire or cable. This terminology may stem from historical usage when non-steel materials were used for tire reinforcement, leading to the continued use of "cord" even after the material changed. The term "steel cable" is more commonly used in other contexts, such as wire rope. There is a distinction between steel cord and other steel products, and further clarification can be found in industry resources. Additionally, the discussion briefly touches on the term "skim compound," indicating a need for more information on that topic as well.
Alex_Sanders
Messages
73
Reaction score
0
What do people in the industry usually mean by steel cord? Is it the same as steel wire, steel rope?

Pictures, Wiki, professional article/dictionary would be appreciated. I googled it but the results are still quite too blurry.

Thanks in advance!
 
Engineering news on Phys.org
I'm guessing you're talking about wire rope. I've never heard it called "steel cord" -- in my experience, it's usually referred to as "steel cable".
 
Steel cord is a term often used in reference to the steel reinforcement in tires. The reinforcement is basically steel wire or cable as indicated here:
http://www.arcelormittal.com/distributionsolutions/wiresolutions/steelcord/steel_cord

I think the only reason the term cord is used instead of wire or cable is simply a matter of industry terminology and historic usage. I'd guess that it came from the time when tires were reinforced with cord or rope type materials that were made of anything BUT steel, so when steel started being used to replace cord in tires, the tradition of calling it 'cord' remained.
 
Last edited by a moderator:
Hey thanks guys, esp. Q_Goest, thanks for the link.

No one from the industry with a definitive answer? May be I got wait for some while more...

Also, what's skim compound?
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Back
Top