Finding Acceleration of Two blocks connected by a string.

AI Thread Summary
Two blocks of different materials connected by a string slide down an inclined plane, with varying coefficients of friction. In Part A, the correct formula for the acceleration of block A, when μA < μB, is derived as aA, 1= (mAgsinθ+mBgsinθ-AmAgcosθ-μBgcosθ)/(mA+mB). In Part B, the acceleration formula changes when μA > μB, leading to a misunderstanding where the user incorrectly assumed both blocks would have the same acceleration. The correct formula for Part B is aA, 2= g(sinθ- μAcosθ), highlighting the importance of recognizing that the blocks may not touch or share the same acceleration under different friction conditions. The discussion emphasizes the need to carefully analyze the effects of friction on the system's dynamics.
shinify
Messages
4
Reaction score
0
1. Two blocks made of different materials connected together by a thin cord, slide down a plane ramp inclined at an angle θ to the horizontal. The masses of the blocks are mA and mB and the coefficients of friction are μA and μB.

GIANCOLI.ch05.p021.jpg

PART A
If μA < μB, determine a formula for the acceleration of block A in terms of mA, mB, and θ.
PART B
If μA > μB, determine a formula for the acceleration of block A in terms of mA, mB, and θ.


3. I got Part A right, of which aA, 1= (mAgsinθ+mBgsinθ-AmAgcosθ-μBgcosθ)/(mA+mB)

For Part B, I attempted it to solve it, and got the same answer as I did in Part A, yet MasteringPhysics says this is incorrect. Am I doing anything wrong? "The correct answer does not depend on the variables: mA, mB, or μB. "

Thanks for the help in advance.

 
Physics news on Phys.org
Hint: Do the blocks have the same acceleration?
 
Oh, got it. I simply assumed that if μAB, then the blocks would end up touching each other and have the same acceleration;

I see now that's not the case. I got aA, 2= g(sinθ- μAcosθ). Thanks for your quick response and help, Doc Al!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top