Finding displacement from PE and KE?

  • Thread starter Thread starter Fei Long
  • Start date Start date
  • Tags Tags
    Displacement
AI Thread Summary
The discussion revolves around calculating the total distance a diver falls from a diving board to their stopping point underwater, given their mass and the net force exerted by the water. The key concepts involve using kinetic energy (KE) and potential energy (PE) equations to find the diver's initial velocity and displacement. The diver's potential energy at the top is converted to kinetic energy as they fall, and the upward force from the water decelerates them. By applying the equations of motion and force, the total distance from the diving board to the stopping point underwater is determined to be 20.3 meters. Understanding the relationship between KE, PE, and the forces involved is crucial for solving similar problems.
Fei Long
Messages
5
Reaction score
0

Homework Statement


We were assigned bookwork, we have a test on thursday, and I really don't understand the concepts of the lesson or what we are suppose to be doing. (My teacher is not the best by any standards.) Anyhow, here is the problem.

" A 50.0 kg diver steps off a diving board and drops straight down into the water. The water provides an upward average net force of 1500 N. If the diver comes to rest 5.0 m below the water's surface, what is the total distance between the diving board and the diver's stopping point under water? "

Homework Equations


KE = 1/2mv^2
PE = mgx

The Attempt at a Solution


I'm confused on the entire concept of Kinetic and Potential energy. In this problem it says I need to find the divers point underwater? The only thing I can think of is solving for Ek and then Ek equals PEg, and solve for displacement, but I don't have velocity, I asked my teacher for help, and he says those are the only equations we needed, even though later he said he hadn't even looked at the problem he'd assigned.. Any help is much appreciated, not only on this specific problem but concept wise as well.
 
Physics news on Phys.org
at the top of the board, the diver has PE = mgh
at the bottom, he has KE = (1/2)*m*v^2 = mgh
it takes a 1500 N force 5 meters to decelerate a 50 kg mass traveling at v
so, you can find the initial velocity
so you can find the KE
set that equal to the PE, and solve for h
add 5
 
Oh yeah! I can do F=ma to get acceleration and plug that into V = ax +vi to get my velocity, and it says when the diver stops, so that's why you add 5 to the end to get 20.3 m . Thanks!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...

Similar threads

Back
Top