Finding the initial and final charge of two spheres

AI Thread Summary
Two identical metal spheres with differing charges attract each other with a force of 70.2 mN. When brought into contact, they equalize their charges, resulting in a final charge of approximately 2.716 µC on each sphere. After being separated again, they repel each other with a force of 18.954 mN. The calculations suggest that the initial charge on sphere 1 is around 5.72 µC, while sphere 2 has a charge of approximately -0.288 µC. The user is verifying their calculations after receiving feedback that part B of their solution was incorrect.
fal01
Messages
14
Reaction score
0

Homework Statement




Two identical small metal spheres with q1 > 0
and |q1| > |q2| attract each other with a force
of magnitude 70.2 mN, as shown.

The spheres are then brought together until
they are touching. At this point, the spheres
are in electrical contact so that the charges
can move from one sphere to the other until
both spheres have the same final charge, q.

After the charges on the spheres have come
to equilibrium, the spheres are moved so that
they are again 1.87 m apart. Now the spheres
repel each other with a force of magnitude
18.954 mN.

Returned to original position
A.)What is the final charge on sphere 2? The Coulomb
constant is 8.98755 × 10^9N  m2/C2
.Answer in units of µC
002 (part 2 of 2) 10.0 points

B.)What is the initial charge q1 on the first
sphere?
Answer in units of µ

Homework Equations


F=kq1q2/r^2
x=-b(+/-)sqrt(b^2-4ac)/2a




The Attempt at a Solution



q1 is positive, q2 is negative

F 12 = F 21 = 70.2 mN = -k(q1)(q2)/r²
k = 1/((4)(π)(ε) = 8.9876 x 10^9 m²/c²

70.2mN = -(8.9876 x 10^9)(q1)(q2)/1.87²

after the spheres touch the charge on each sphere is qf = (q1 +q2)/2
F = 18.954 x 10^-3 = (8.9876 x 10^9)(qf²)/1.87²
qf = 2.716 uC
A) 2.716 uC
q1 = -q2 + 2*qf
q1 = -q2 +5.432uC
q1(q2) = 2.73 x10^-11
-q2² + (5.43 x 10^-6)q2 +2.73 x 10^-11 = 0
q2= -+2716 x 10^-6 +/- sqrt(2.95 x 10^-11 + 4(2.73 x 10^-11))/4 = +2.716 +/- 2.944 uC
q2 is negative , so -.288 uC
q1= 5.72 uC
B).?
 
Physics news on Phys.org
You have answers for q1 and q2. I plugged them in and it looks like they are right. You appear to have answered parts A and B.

??
 
This is an online homework. It says I got A right but B is wrong. I will go back through and check my math. I just wanted to make sure the process was right.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top