Grade 12 Physics Bomb explosion

AI Thread Summary
The discussion revolves around calculating the velocity and direction of Piece 1 from a bomb explosion, using momentum conservation principles. The initial momentum is zero since the bomb was at rest, leading to equations for both horizontal and vertical momentum. The horizontal equation simplifies to 0 = 2kg (V1F) cos(x) - 60 kg/m/s, while the vertical equation simplifies to 0 = 2kg (V1F) sin(x) - 30 kg/m/s. The ratio of the equations leads to the conclusion that tan(x) = 1/2, indicating the angle of Piece 1's trajectory. Participants clarify that V1F cancels out in the calculations, allowing for the determination of direction without needing its specific value.
Shin-
Messages
3
Reaction score
0
Question:
A bomb explodes and 3 pieces are flying in different directions.
Piece 1 : weighs 2kg and is traveling at the North East direction
Piece 2 : weighs 1kg and is traveling in the south direction ( exactly downards )
Piece 3 : weighs 3 kg and is traveling in the west direction ( exactly to the left )
Find the velocity and direction that Piece 1 is traveling at.

I know to use the momentum equation twice , one with the horizontal direction and one on the vertical direction.

Horizontal:
M1V1(initial)+M2V2(initial)+M3V3(initial) = M1V1(Final)+M2V2(Final)+M3V3(final)
Since all the initial velocities are 0 ( because bomb was at rest before explosion , the entire left side is equal to zero)

0 = 2kg ( V1F ) cosx + 1kg ( 30 m/s) cos 90 + 3kg ( 20 m/s ) Cos 180
= 2kg (V1F) cosx - 60 Kg/m/s
30 m/s = V1F cosx
Above , i canceled M2V2(FINAL) because i set that as the reference direction and angle , so it counts as 0. and i did minus 60 kg/m/s because its to the negative direction.

Vertical :
M1V1(initial)+M2V2(initial)+M3V3(initial) = M1V1(Final)+M2V2(Final)+M3V3(final)
Since all the initial velocities are 0 ( because bomb was at rest before explosion , the entire left side is equal to zero)

0 = 2kg ( V1F ) sinx + 1kg ( 30 m/s) sin 90 + 3kg ( 20 m/s ) sin 180

= 2kg ( V1F) sinx - 30 Kg/m/s
15 m/s = V1F sinx

Then divided the final equations to get

Sinx V1F 15 m/s
--------- = -------
Cosx V1F 30 m/s



Tanx V1F = .5 m/s

now i have no idea wat to do to find the direction and speed :( can anyone help please?
 
Physics news on Phys.org
You neglected to cancel out V1F in your final equations.
 
No , i just rewrote it as Tanx V1f

Sinx/Cosx = Tanx ( trig identity )
 
any ideas?
 
Hi Shin,

I think you misunderstood Phlogistonian's post.

You had:

Sinx V1F 15 m/s
--------- = -------
Cosx V1F 30 m/s

this simplifies to

tan x = (1/2)

The V1F is not inside the trig function and so will cancel since it is in both numerator and denominator.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top