Heat Transfer of Horizontal Closed Loop Systems

AI Thread Summary
The discussion focuses on finding governing equations for heat transfer in horizontal closed loop systems, particularly regarding the Nusselt Number's relationship with Reynolds and Dean Numbers. Participants suggest resources like the textbook "Fundamentals of Heat and Mass Transfer" for foundational knowledge. They also mention that detailed thermal analysis may require computational tools such as COMSOL or CFX. A simple lumped-parameter model could be developed if the system's general heat transfer properties are known. Overall, the conversation emphasizes the need for specific equations and methodologies in analyzing heat transfer in geothermal systems.
NSX
Messages
64
Reaction score
0
Does anyone know where I can find the governing equations on the heat transfer of a horizontal, closed loop system?

e.g. http://www.eere.energy.gov/consumer/images/closed_loop_system_horiz.gif

I've tried searching online, and all I can find is the general overview, no equations :frown:

In particular, I know that the Nusselt Number is some function of the Reynolds and Dean Numbers in this case -- what it is exactly I have no idea.

Can anyone recommend any articles, textbooks, anything?!

Thanks
 
Last edited:
Engineering news on Phys.org
The linked image is that of geothermal system.

The standard text on heat transfer is -
Fundamentals of Heat and Mass Transfer (Hardcover)
by Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine
John Wiley & Sons

Here is one example of heat transfer -
http://en.wikipedia.org/wiki/Heat_transfer_coefficient

Detailed thermal analysis would require a FEM-based heat transfer computational package such as COMSOL or CFX.

One could perhaps develop a simple lumped-parameter model if one new the general heat transfer properties of the system, i.e. hot and cold side temperatures, properties of the heat transfer fluid, ground and heat exchangers.
 
Last edited:
Astronuc said:
The linked image is that of geothermal system.

The standard text on heat transfer is -
Fundamentals of Heat and Mass Transfer (Hardcover)
by Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine
John Wiley & Sons

Here is one example of heat transfer -
http://en.wikipedia.org/wiki/Heat_transfer_coefficient

Detailed thermal analysis would require a FEM-based heat transfer computational package such as COMSOL or CFX.

One could perhaps develop a simple lumped-parameter model if one new the general heat transfer properties of the system, i.e. hot and cold side temperatures, properties of the heat transfer fluid, ground and heat exchangers.

Thanks for the help.
That's actually what I was planning to do, using the LMTD method and a 2D approximation.
I have the Introduction to Heat Transfer of the book you mentioned, and it wasn't a help. I will read into the version you suggested.

Thanks
 
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Back
Top