HELP! Choosing Between Paraffin and Wood for Heat Storage

  • Thread starter Thread starter laramman2
  • Start date Start date
  • Tags Tags
    Thermodynamics
AI Thread Summary
Paraffin is preferred over wood for heat storage due to its higher specific heat capacity of 2900 J/kgC compared to wood's 1750 J/kgC. This means paraffin can store more heat energy per unit mass, allowing for more effective heat retention. Additionally, paraffin has a high latent heat of fusion, which enables it to maintain a constant temperature during phase change, prolonging heat release. This characteristic makes paraffin particularly effective for applications requiring stable heat output. Overall, paraffin's thermal properties make it a superior choice for heat storage solutions.
laramman2
Messages
15
Reaction score
0
HELP! Thermodynamics question

Homework Statement


Which would you chose between paraffin & wood to make heat storage? Why?
specific heat of paraffin = 2900 J/kgC
specific heat of wood = 1750 J/KgC2. The attempt at a solution

They say that the answer is paraffin but I don't know why. Could anyone help me to deal with this problem?
 
Physics news on Phys.org


laramman2 said:

Homework Statement


Which would you chose between paraffin & wood to make heat storage? Why?
specific heat of paraffin = 2900 J/kgC
specific heat of wood = 1750 J/KgC


2. The attempt at a solution

They say that the answer is paraffin but I don't know why. Could anyone help me to deal with this problem?
For effective heat storage you want the temperature of the substance to decline as slowly as possible as heat is removed.

Paraffin is also good because it has a very high latent heat of fusion, so if you heat it above its melting point it will stay at same temperature (ie its melting point) for a long time as the heat flows out of it.

AM
 


Andrew Mason said:
For effective heat storage you want the temperature of the substance to decline as slowly as possible as heat is removed.

Paraffin is also good because it has a very high latent heat of fusion, so if you heat it above its melting point it will stay at same temperature (ie its melting point) for a long time as the heat flows out of it.

AM

Thank you very much :)
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top