Help with these problems please

  • Thread starter Thread starter Lilly
  • Start date Start date
AI Thread Summary
The discussion centers on two main questions related to gas laws and properties. The first question asks how the Van der Waals equation simplifies to the ideal gas law under conditions of low pressure and high temperature. The Van der Waals equation is presented as (P - a/V^2)(V - b) = RT, with 'a' and 'b' representing adjustments for intermolecular forces and molecular volume, respectively. The simplification occurs because, at low pressures and high temperatures, the effects of these adjustments become negligible, aligning the equation with the ideal gas law.The second question involves comparing two 1.00 L samples of argon gas at different temperatures (27°C and 77°C) to analyze changes in momentum per impact and the number of impacts per second. The discussion suggests that additional equations related to pressure and impact values may be necessary to fully address this question. Participants encourage further reading on thermodynamics and gas equations to gain a deeper understanding.
Lilly
Messages
12
Reaction score
0
help...with these problems please!

hi, could someone please help me with these? i would really appreciate it!

1) We state that the ideal gas law tends to hold best at low pressures and high tempuratures.Show how the Van der Waal's equation simplifies to the ideal gas law under these conditions.

2) Consider separate 1.00 L samples of Ar (g), both containing the same number of moles, on at 27 degrees C and the other at 77 degrees C. Compare the change in momentum per impact and the number of impacts per second in the 2 samples.
 
Chemistry news on Phys.org
Hi lily.
Let me help you with the first question.
What is van der waals equation?{(P-a/V^2)(V-b)=RT}
What do a & b represent??Why did van der waal make these changes??
If you are still unable to solve it,Read : thermodynamics,Gas equation,Van der waals equation .
hope to have been of help.
 
Hello,

Thanks poolwin2001 for reminding Van der Waals' famous equation. Lilly, there has to be another equation in which pressure and impact-related values are present.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top