Analyzing an Elastic Collision Between Two Hockey Pucks

  • Thread starter Thread starter nsaZn23
  • Start date Start date
  • Tags Tags
    Momentum
AI Thread Summary
An elastic collision between two hockey pucks is analyzed, where one puck moves at 0.43 m/s and collides with a stationary puck. After the collision, the first puck is deflected at 35° with a speed of 0.36 m/s. The discussion emphasizes the importance of using conservation of momentum rather than energy for solving the problem. Participants discuss breaking down the velocities into components to find the speed and direction of the second puck. Ultimately, one participant successfully solves the problem after seeking clarification on the approach.
nsaZn23
Messages
3
Reaction score
0

Homework Statement


A hockey puck moving at 0.43 m/s collides elastically with another puck that was at rest. The pucks have equal mass. The first puck is deflected 35° to the right and moves off at 0.36 m/s. Find the speed and direction of the second puck after the collision.


Homework Equations


1/2mv2 + 1/2mv2 = 1/2mv2 + 1/2mv2
momentum initial = momentum final


The Attempt at a Solution


no idea
 
Physics news on Phys.org
Start by putting the equations for initial momentum and final momentum.

m \vec{v_{1}} + m \vec{0} = m \vec{v_{1}}' + m \vec{v_{2}}'

then set up the KE equations too
 
nsaZn23 said:

Homework Statement


A hockey puck moving at 0.43 m/s collides elastically with another puck that was at rest. The pucks have equal mass. The first puck is deflected 35° to the right and moves off at 0.36 m/s. Find the speed and direction of the second puck after the collision.


Homework Equations


1/2mv2 + 1/2mv2 = 1/2mv2 + 1/2mv2
momentum initial = momentum final


The Attempt at a Solution


no idea

This would be an elastic collision.
http://en.wikipedia.org/wiki/Elastic_collision#One-dimensional_Newtonian

You would want to focus on the conservation of momentum, not the conservation of energy.

In this regard you need to identify the components of the x,y velocity and add them separately to determine the components of the one you don't know. Then recombine the components to give the right answer.
 
uhhh I'm bad at physics can you elaborate?
 
nsaZn23,

are you familiar with vectors?

the problem basically is

v_{1} \vec{i} + \vec{0} = v_{1}_{x}' \vec{i} + v_{1}_{y}' \vec{j} + v_{2}_{x}' \vec{i} + v_{2}_{y}' \vec{j}
 
Yeah,

I see that Mass X Velocity initial1 + Mass X Velocity initial2 = Mass X Velocity Final1 + Mass X Velocity Final2.

nevermind, i figured out how to do the problem, thanks.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top