How Long Does It Take for a Dropped Camera to Hit the Ground?

  • Thread starter Thread starter ms. confused
  • Start date Start date
  • Tags Tags
    Camera
AI Thread Summary
A parachutist drops a camera from 50m while descending at 10m/s, raising questions about the correct use of speed and velocity in calculations. The initial velocity should be negative due to the downward motion, and the displacement must also be negative, set at -50m. The appropriate equation to use is -4.9t² - 10t + 50 = 0, which accounts for both the initial height and downward acceleration. Solving this quadratic equation will yield two roots, one of which will be negative, representing an impossible scenario. The focus should be on the positive root to determine the actual time it takes for the camera to hit the ground.
ms. confused
Messages
90
Reaction score
0
A parachutist descending at a speed of 10m/s drops a camera from an altitude of 50m. How long does it take the camera to reach the ground?

Is speed the same thing as velocity in this case? If not, what do I do? I assumed it was the same and went: Vi= 10; a=-9.8; d=50 goes into formula d=Vit + 1/2at^2. But something's wrong... :mad:
 
Physics news on Phys.org
The camera is moving down initially, so vi has to be negative.
 
I keep getting a negative root when I try to do the quadratic formula. WHY? Wait, I tried a different formula and now I get negative time which is impossible. Are you sure it's supposed to be -10m/s?
 
Last edited:
I forgot to say something: d is negative, too.

That's because d=y-y0. If your initial height is 50 m and your final height is 0 m, you can see that d=-50 m.
 
First establish your coordinate system: Take the ground to be 0, positive upward. Then a= -9.8 m/s2, initial velocity= -10 m/s, initial height= 50 m.
The equation for height of the camera is -4.9t2- 10t+ 50 and we want to determine when the height will be 0-
Solve -4.9t2- 10t+ 50= 0. One root will be negative- that's the time at which if you had thrown the camera up into the air it would now be at 50 m with downward velocity of -10 m/s. Obviously, you want the positive root.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top