Internal Resistance and Circuits

AI Thread Summary
The discussion revolves around solving a circuit problem involving two voltage sources and their internal resistances. The user is attempting to calculate the currents A, B, and C using Ohm's Law and Kirchhoff's laws but is struggling with the equations. They have correctly set up equations based on the circuit but are unsure how to proceed with simultaneous equations. Another participant suggests using the relationship A + B = C to create a third equation for solving the system. The conversation emphasizes the need for systematic elimination to find the values for the currents.
james_rich
Messages
23
Reaction score
0
Hey, I'm revising for my summer exams, and gotten stuck on this particluar question.

_______ 6V ______2.0 ohms___
I I
A I I
I I
I_____4.0 ohms______________ I
I C I
I I
B I I
I I
I________1.5V_______________I

SORRY I HOPE THIS CIRCUIT IS READABLE

Question

The 6V cell has a 2ohm internal resistance...The 1.5V cell has a 1ohm internal resistance. Work out the currents A, B and C!

I have split the circuit into two series circuits to make it easier for me

okay...as V=IR

6V = (C x 4ohms) + (A x 2ohms) + (internal resistance - A x 2ohms)
6V = (C x 4) + (A x 4)

...and for the other series circuit

1.5V = (C x 4ohms) + (internal resistance - B x 1ohm)
1.5V = (c x 4) + B


errr...now I'm stuck :cry: ...have i made a mess of trying to work this out...or do i need to use simultanous equations to work it out. I haven't a clue!

Please Help!

Thanx :smile:

James
 
Physics news on Phys.org
okay it didn't come out that great...

current A is across the 2 ohm resistor, and 6V cell
current B is across the 1.5V cell
current C is the junction of A and C across the 4 ohm resistor.

I kno i may have to use Kirchhoff's laws! but not sure how

hope this helps if your as confused as i am! heehee :smile:
 
james_rich said:
6V = (C x 4ohms) + (A x 2ohms) + (internal resistance - A x 2ohms)
6V = (C x 4) + (A x 4)

...and for the other series circuit

1.5V = (C x 4ohms) + (internal resistance - B x 1ohm)
1.5V = (c x 4) + B
Looks good to me. But you need one more equation relating the three currents: A + B = C.

Now you have three equations and three unknowns. Solve!
 
okay...

6V = 4C + 4A
6V = 4C + B

combining the equations together i get:

B = 4 x A

i can't seem to be able to get any values for either A or B, to be able to work out the current of C using Kirchoff's first law!

Is this problem actually solveable?
 
james_rich said:
okay...

6V = 4C + 4A
6V = 4C + B
First equation is OK. Second should be:
1.5 = 4C + B

But don't forget the third equation:
A + B = C.

Solve it systematically. Start by using the last equation to eliminate C from the first two.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...

Similar threads

Back
Top