Light absorbtion and change in temperature of liquids

AI Thread Summary
The discussion focuses on differentiating two liquids by touch through temperature changes after illuminating them with light, without using a thermometer. The user is considering using liquids with contrasting colors, such as black and white, to enhance the temperature difference perceived by touch. It is emphasized that the temperature difference must be significant enough for human detection, not just a minor variation. The conversation seeks ideas on the optimal compositions of the liquids and the type of light needed to achieve a noticeable temperature difference. Overall, the goal is to design an experiment that effectively distinguishes between the two liquids based on their thermal response to light.
Rodwen
Messages
3
Reaction score
0
Hi hi,

Sorry if this is awful and boring. Basically what I want to work out is a way to differentiate two different liquids by touch (specifically, temperature) after shining a light on them. A thermometer cannot be used. The variables open here are the compositions of the liquid (I'm going with colour differences - perhaps a black and a white) and the light used. I also need to consider what effect the containers would have on this experiment.

Any ideas, riffing off my black/white idea here, or other thoughts?
 
Science news on Phys.org
Rodwen said:
A thermometer cannot be used.
Rodwen said:
by touch (specifically, temperature)
Which is it?
 
Bystander said:
Which is it?

It's both! What I mean is that the temperature difference must be large enough to be perceived by the human hand. It cannot be a minute difference measurable only by a thermometer. :)
 
I'm confused about what you're wanting to do. Are you wanting to shine light one two liquid samples for the same period of time and then figure out which one is which just based on the temperature?
 
Drakkith said:
I'm confused about what you're wanting to do. Are you wanting to shine light one two liquid samples for the same period of time and then figure out which one is which just based on the temperature?
In a nutshell, yes. The question is what the composition of the liquids would need to be and what the light would need to be in order to achieve this.
 
Thread 'Thermo Hydrodynamic Effect'
Vídeo: The footage was filmed in real time. The rotor takes advantage of the thermal agitation of the water. The agitation is uniform, so the resultant is zero. When the aluminum cylinders containing frozen water are immersed in the water, about 30% of their surface is in contact with the water, and the rest is thermally insulated by styrofoam. This creates an imbalance in the agitation: the cold side of the water "shrinks," so that the hot side pushes the cylinders toward the cold...
Back
Top