How Is Energy Loss Calculated in Connected Capacitors?

AI Thread Summary
The discussion focuses on calculating energy loss in connected capacitors, specifically C1 (4 µF) and C2 (3 µF), with initial charges of 200 µC and 300 µC, respectively. Participants clarify that the energy loss can be determined by first calculating the energy stored in each capacitor using the formula E=1/2 QV and then finding the common potential difference after connecting them in parallel. The effective capacitance is calculated as 7 µF, leading to a final energy calculation that initially yields incorrect results. Ultimately, the correct energy loss is confirmed to be approximately 0.02 J, emphasizing the importance of using the right formulas and understanding the system configuration.
thereddevils
Messages
436
Reaction score
0

Homework Statement


A capacitor C1 (the one on top in the diagram) of capacitance 4 mu F is charged until its charge is 200 mu C and another capacitor C2 (the one below) of capacitance 3 mu F is charged until its charge is 300 mu C . Then both capacitors are connected in the circuit as shown in the figure . What is the total enerygy loss in the capacitors ?


Homework Equations



E=1/2CV^2 or E=1/2 QV

The Attempt at a Solution



I an not sure its asking for energy loss as a whole or energy loss for each capacitors .

so i know how to calculate the energy stored in each capacitors using the formula , what should i do after that >
 

Attachments

Physics news on Phys.org
Find the common potential difference across the capacitors.
They are connected in parallel.
find the equivalent capacitor.
Find the final energy stored in the combination of the capacitors.
 
rl.bhat said:
Find the common potential difference across the capacitors.
They are connected in parallel.
find the equivalent capacitor.
Find the final energy stored in the combination of the capacitors.

ok let me try

the effective pd would be 100+50=150 V

Effective capacitance = 7 mu

energy loss = 1/2 x 7 mu x 150^2 = 0.07875 J ?

but the answer given is 0.002 J

btw , is energy stored in the capacitors the same as energy loss in the capacitors
 
Common voltage V = (Q1 + Q2)/(C1 + C2)
 
rl.bhat said:
Common voltage V = (Q1 + Q2)/(C1 + C2)

thanks , so let me retry ,

E= Q^2/2C

=[(500 x 10^(-6))^2]/2(7 x 10^(-6))

=0.018 which is approximately 0.02 J

Am i correct nw ?
 
That is correct.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top