Particle in Simple Harmonic Motion

AI Thread Summary
A 1kg object attached to a horizontal spring is released from an initial stretch of 0.100m, and the time until its speed is zero again is 0.500s. The spring constant k was calculated as 98 N/m, leading to an angular frequency ω of 9.90 rad/s. The maximum speed was initially calculated as 0.990 m/s, but the correct maximum speed is 0.628 m/s due to the oscillation frequency being 1 Hz. The time value of 0.500s is crucial for determining the frequency of oscillation, which ultimately affects the maximum speed calculation. The problem was resolved by recognizing the importance of frequency in the context of simple harmonic motion.
Willjeezy
Messages
29
Reaction score
0

Homework Statement


Not exactly sure why a time value of 0.500s is given, but I am positive it is why my answer isn't correct:

Q. a 1kg object is attached to a horizontal spring. The spring is initially stretched by 0.100m and the object is released from rest there. It proceeds to move without friction. The next time the speed of the object is zero is 0.500s later. What is the maximum speed of the object?

Homework Equations


Vmax = Aω
ω=√(k/m)
Fs=-kx


The Attempt at a Solution


Given:
t = 0.5s
Amplitude: 0.100m
m: 1kg

I can find k:
Fs=-kx
mg = -kx
(1kg * -9.8) = -k (0.100m)
k = 98 N/m

Find ω
ω=√(k/m)
= √(98/1)
= 9.90

Vmax = Aω
=(0.1)(9.90)
=0.990 m/s.

However, the answer is 0.628m/s. I don't understand the purpose of "the next time the velocity is zero is 0.5s later" I interpret that as:

"it to 0.5seconds to reach negative amplitude", which to my understanding isn't needed?
 
Physics news on Phys.org
wait I see my problem, it is moving horizontally not vertically so mg = -kx doesn't apply here.
v = m / s
= 0.2m / 0.5s
= 0.4 m/s

don't know how to go about finding acceleration from here.
 
Think. If the next time the speed is zero is in 0.5 second, then what is the frequency of the oscillation?
 
to anyone wondering in the future...

the mass was actually the unneeded info:
ω=2∏f

frequency is = # cycles / s
= 1 hz in this situation

then use Vmax

SOLVED. Thanks.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top