PHYSIC PROBLEM+Thermodynamic Experts ONLY

  • Thread starter Thread starter metaphysicist
  • Start date Start date
  • Tags Tags
    Physic
AI Thread Summary
The discussion centers around solving a thermodynamics problem from a practice test, specifically regarding the highest temperature point in a cyclic process represented on a PV diagram. Participants argue whether point B or point C yields the highest temperature, with point B being associated with the highest pressure and lowest volume, while point C has a higher product of pressure and volume (P*V). The consensus leans towards point C as the correct answer, as it reflects a higher temperature based on the ideal gas law and the characteristics of isothermal processes. The conversation emphasizes understanding the derivation of equations in IB physics to simplify problem-solving. Ultimately, the key takeaway is that point C is determined to produce the highest temperature in this scenario.
metaphysicist
Messages
1
Reaction score
0
URGENT PHYSIC PROBLEM+Thermodynamic Experts ONLY

go to http://www.xmission.com/~dmcguire/IBPhysics/Units/ThermalPhysics/ThermalPhysicsPracticeTest2004.pdf

solve problem number 28.

is the answer b or c?

argument for b: b is the point of the highest pressure, and lowest volume in the process, it should produce the highest temperature.

argument for c: applying the fact that in a PV diagram, the product of P*V (x and y-coordinate) is nRT (according to the ideal gas law), since nR is constant in the cyclic process, then highest temperature point is found by comparing the P*V at point b and at point c. P*V at point b is 3, and P*V at point c is 9, then by this method point c produce the highest temperature.


So the question is that whether Ideal Gas Law is applicable in this case?
 
Last edited by a moderator:
Physics news on Phys.org
b) B

:bugeye:
 
At first sight I would say C) or D).

Point C): nRT_{c}=9P_oV_o

Point D) nRT_{d}=8P_oV_o

Point B) nRT_{b}=3P_oV_o

It is clear enough that the highest temperature is at point C). You should not be needed to do any calculations. One can see it at first sight if you know what is an insothermal (T=cte). Such a curve is an hyperbola P=const./V which has the same temperature. That temperature grows at the curve is displaced towards the right of the diagram. Due to the fact that C) is the farthest and highest point, C) has the highest temperature.

You don't need an expert to solve this.
 
the key to IB physics problems is to understant where the equations come from. with this the questions become a lot easier. personally I'm in AP physics but there are some IB'ers in my class.

cheers

-fiber
 
metaphysicist said:
argument for b: b is the point of the highest pressure, and lowest volume in the process, it should produce the highest temperature.
This would be the correct answer if the system was simply allowed to expand adiabatically from this point (no heat exchanged with surroundings). But if that were to occur, the pressure would drop and you would end up at a pressure well below C. So we can conclude that from B to C, heat is being added to the system - more heat energy than the work done by the gas, since the internal energy (PV = volume x energy/unit volume) of the gas increases. Therefore temperature (PV=nRT) increases.

AM
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top