Physics 11 Net force and Acceleration

AI Thread Summary
The discussion focuses on calculating the net force and acceleration of a Saturn rocket during launch. The rocket's weight is determined to be 2.92x10^7 N, and the net force at blast-off is calculated as 4.2x10^6 N. The acceleration upon leaving the launch pad is found to be 144 m/s², and its speed after 60 seconds is 86.4 m/s. A key point raised is that as the rocket ascends, its mass decreases due to fuel consumption, which increases acceleration. The user seeks clarification on their calculations, particularly regarding the net force.
anOldMan
Messages
6
Reaction score
0

Homework Statement


g=10m/s^2
A fully loaded Saturn rocket has a mass of 2.92x10^6kg. Its engines have a thrust of 3.34x10^7N.

a) How much does the rocket weigh. answer 2.92x10^7 N
b) What is the net force on the rocket when it blasts off? answer 4.2x10^6N
c) What is the acceleration as it leaves the launch pad? 144m/s^2
d) What is its speed after 60 seconds? answer 86.4m/s
e) As the rocket moves away, the engine thrust is constant but the mass decreases - why? What effect does this have on acceleration. answer Fuel is consumed; m decreases, a increases.

Homework Equations



F=ma P.E. =mgh

The Attempt at a Solution


I have no idea how the answer for b) becomes 4.2x10^6N
Any help would be appreciated.
 
Physics news on Phys.org
Part c

Based on the question I got the mass as 2.92 and the thrust as 33.4. 33.4 to match the exponent for both numbers. The answer I got when F/m=a is 33.4kg by m/s^2/2.92Kg=11.4m/s^2m/s^2. This is obviously wrong. What am I doing wrong?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top